2-5.3 POWER LOST RESUME (JP9)
JP9: POWER LOST RESUME
Normal (default)
Enabled
NOTE: This jumper allows user to use the switch of ATX power supply
to control ON/OFF switch directly instead of using the power
switch on the motherboard.
2-5.4 CLEAR CMOS DATA (JBAT1)
JBAT1: CLEAR CMOS DATA
Clear CMOS Data
Retain Data (default)
NOTE: We recommend user to unplug the power cord from ATX
power supply to take precautions. Clear CMOS memory by
shorting this jumper pin 2 & pin3 momentarily, and then
remove the cap back to pin 1 & pin2 to retain original CMOS
setting.
2-5.5 WAKE ON LAN (WOL) FUNCTION (WLO1)
WOL1 : WAKE ON LAN (WOL) FUNCTION
Connect the Wake On LAN signal from LAN card
to WOL1
NOTE: For support WOL function, the ATX power supply must
provide at least 5V / 720mA standby current.
65MIV/65MIV2/65MIV-X/65MIV2-X
JP9
1
3
JP9
1
3
JBAT1
1
3
JBAT1
1
3
WOL1
21