Jp3/Jp4: Usb Port Select; Jp6: Power Lost Resume; Jvga1: Vga Card; Jwol1: Wake O Nlan (Wol) Connector - SOLTEK SL-67EB Plus Manual

JP3/JP4: USB Port Select

Redirect USB port 1 to USB
Redirect USB 1 to AGP port

JP6: Power Lost Resume

This jumper allows you to use the switch of ATX power supply to control
ON/OFF directly instead of using the power switch on the motherboard.

JVGA1: VGA Card

NOTE: This jumper is set for the PCI VGA card. Open this jumper
JWOL1: Wake On LAN (WOL) Connector
This connector is designed to use Lan to bootup the system. Connect the wake
on signal from Lan card to this connector.
USB Port
connector(Default)
Power Lost Resume
Normal(default)
Enabled
For PCI VGA Card*
Normal (Default)
when the system isn' t able to boot up. If you use AGP
card, it is important to set default with JVGA1.
JP3 / JP4
JP6
JVGA1
11