Table of Contents
Advertisement
3. Use the arrow keys to choose which drive containing the existing data
to be copied.
WARNING :
WARNING :
All target drive data will be erased. Make sure you choose the
correct drive.
4. Press <Ctrl-Y> keys to save selection and start duplication. The following
confirmation screen will appear.
5. Select "Y" continue. If you choose "N", you will be returned to step 1.
6. Once "Y" is selected, the following progress screen will appear. The
process will take a few minutes.
Please Wait While Duplicating The Image
Complete
7. Once mirroring is complete, the following screen will appear confirming
that your Security array has been created. Press any key to reboot the
system.
5-2.8 Making a FastTrak100-Lite Disk Array Bootable
W A R N I N G :
W A R N I N G :
Lite, your PC or server must be configured in the CMOS Setup to use the
FastTrak100-Lite as a bootable device (versus the onboard controller or another
add-in card). This option is not available if the FastTrak100-Lite is being used
as a secondary controller.
Start to duplicate the image ...
Do you want to continue? (Yes/No)
Y - Continue
N - Abort
Array has been created.
<Press Any key to Reboot>
In order for you to boot from an array on the FastTrak100-
103
Chapter 5 RAID Controller
10%
Advertisement
Table of Contents
