Table of Contents
Advertisement
5-2.14 Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable or
disable the halting function of FastTrak100-Lite BIOS (the default) if it
detects an error on boot up. You may also view the system resources
(Interrupt and I/O port address) of FastTrak's data channels.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Halt On Error:
[ System Resources Configuration ]
Channel 1 (IDE1)
Channel 2 (IDE2)
[ I= I=Space] Change Option
5-2.15 Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration ---- Options] section allows you to enable or
disable FastTrak100-Lite to Halt operation at the BIOS startup screen should
an error be detected. This is the only option that can be changed on this
screen.
[ Adapter Configuration - Options ]
Interrupt : A
Interrupt : A
[ Keys Available ]
109
Chapter 5 RAID Controller
Enable
I/O Port : FFF0
I/O Port : FFA8
[Esc] Exit
Advertisement
Table of Contents
