Table of Contents
Advertisement
75DRV3/75DRV3+
Always On
Suspend -->Off
All Modes -->Off
Video Off Method This determines the manner by which the monitor is
V/H SYNC +
Blank
Blank Screen
DPMS Supports
MODEM Use IRQ Name the interrupt request (IRQ) line assigned to
Soft-Off by PWRBTN When Enabled, turning the system off by pressing
State After Power
Failure
Monitor will remain on during power saving
modes.
Monitor blanked when the systems enters the
Suspend mode.
Monitor blanked when the system enters either
Suspend or Standby modes.
blanked.
This selection will cause the system to turn off
the vertical and horizontal synchronization ports
and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Select this option if you monitor supports the
Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards to
select video power management values.
the modem (if any) on your system. Activity of the
selected IRQ always awakens the system.
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
the on/off button places the system in a very low-
power-usage state.
This field lets you determine the state that your PC
returns to after a power failure.
The choices: On; Off; Auto.
74
Advertisement
Table of Contents
