Table of Contents
Advertisement
6. If a message informing you that the file "Win95/98 Promise FastTrak100-
Lite.MPD" cannot be found, go to the "Copy files from:" text box and type:
"A:\WIN9x-ME".
7. Choose "Yes" when asked whether you want to start your computer. Be
sure to remove the diskette from drive A.
5-3.2-7 Confirming Driver Installation in Windows 98/95
To confirm that the driver has been properly loaded in Win 95/98, perform
the following steps:
1. Choose "Settings" from the "Start" menu.
2. Choose "Controller Panel", and then double-click on the "System" icon.
3. Choose the "Device Manager" tab, and click the "+" in front of "SCSI &
RAID controllers." "Win95-98 Promise FastTrak100-Lite controller"
should appear.
5-3.3 DOS/Windows 3.1x
For first -time installation, follow the standard procedure of installing DOS
on to your hard disk (partition all hard drive with FDISK and format before
performing the following procedure):
1. Insert "Disk 1" of your DOS installation diskettes into drive A:.
2. Type "A:\SETUP" at the "A:\" prompt.
3. Continue with normal DOS installation procedure, and refer to your DOS
manual for additional details.
Note:
The FastTrak100-Lite BIOS supports both DOS and Windows 3.1x
without software drivers installed.
Chapter 5 RAID Controller
115
Advertisement
Table of Contents
