User Access And Rights - Christie CP2220 User Manual

6.4

User Access and Rights

This table lists the Touch Panel Controller (TPC) permissions:
Table 6.2 User Levels
Permission Level
Status
Operator
Advanced
Administrator
Service
Marriage
Table 6.3 Accessible Windows per User Level
Menu
Main
Status
Diagnostics
- Interrogator
- SMPTE Errors
- System Logs
- Server Test
- DLP Management
Network Devices
Channel Setup
- Config 1
- Config 2
- 3D Control
CP2220 User Manual
020-100420-07 Rev.1 (1-2012)
Description
Any user can view basic projector status, diagnostic information and software version information. This
is the default level for Serial Communication sessions.
This level of user can activate channels and test patterns, view detailed diagnostic logs for in-depth
troubleshooting and view server errors. This is the default level at the TPC.
This level of user can define all display setups such as source resolution, aspect ratio, image cropping,
and color gamut information, optimize light output, record lamp changes, and define setup files as
selectable choices for processing a variety of incoming signals.
This level of user can perform screen Foot Lambert calibration, define Ethernet settings (IP network
address), restore backup files, and upgrade the system software. NOTE: Administrators can add users
and set user access rights from its own level and below only.
Installers and other service personnel can access all windows on the TPC, which includes performing
Marriage.
Installers and other service personnel can access all windows on the TPC, which includes performing
Marriage.
Status Operator
X X
X X
X
(except DLP
Management)
X X
Advanced Administrator
X X
X X
X X
(except DLP
Management)
X X
X X
Section 6: Projector Menus
Service Marriage
X X
X X
X X
X X
X X
6-5