Christie CP2220 User Manual page 152

Section Appendix B: Serial API
Intelligent Light System Config (ILS)(Continued)
Move motor to center flag and then move back to current position. Only valid parameter for this command
RSET
is 5. SET only command.
Motor reset status (0-100%)
RSTS
EXAMPLES:
(ILS 1) Enable ILS, lens will be moved to the position in each channel
(ILS 0) Disable ILS, position data in each channel will not be used. Moving lens will not affect any channel setting
(ILS+CALB 5) Calibrate all axes of the lens. Set only command
(ILS+RSET 5) Reset all axes of the lens
(ILS+ACLB 1) Reset lens automatically when power on
Internal Media Block Installed/Device Type (IMB)
Access Level: Advanced
Min Power Level: Power Down
Used to set or query whether an IMB is installed or not. Use the DEVT subcode to set the device type.
SUBCODE DESCRIPTION OF USE
Set device type from the list of devices.
DEVT
Set or query installed state of IMB.
None
EXAMPLES:
(IMI 1) Set to IMB installed.
(IMI+DEVT?L) List valid device types.
(IMI+DEVT?) Query current device type.
Start Interrogator, check interrogator status (INT)
SUBCODE DESCRIPTION OF USE
Start a basic interrogation (set only)
BASC
Start an enhanced interrogation (set only)
ENHA
Responds with 2 values: currently running (1 if running) and result file.
STAT
EXAMPLES:
(INST+BASC 1) Run a basic interrogation (set only)
(INT+STAT?) Query interrogator status. Returns (INT+STAT!00100 00000 "Interrogator_Enhanced_20101103194849.7z"),
which means the interrogator is 100% finished, not currently running and the latest interrogator file that was generated is named
"Interrogator_Enhanced_201001103194849.7z" and can be found on the projector's FTP server.
Internal Test Pattern (ITP)
List and select internal test patterns. This command also creates the customized test pattern list from the internal
test patterns. The list of available test patterns is determined by what files are loaded on the TI cinema electronics.
SUBCODE DESCRIPTION OF USE
Set(1)/Reset(0) full screen size
FULL
When KEEP=1, don't disable test pattern when changing channels
KEEP
NOCR set non-correction test patterns for measured color. Valid range is 0 to 6
NOCR
B-8 CP2220 User Manual
020-100420-07 Rev.1 (1-2012)