Entering Telephone Numbers And Dial Command Modifiers Into Directory Locations - Paradyne COMSPHERE 3910 Installation And Operation Manual

COMSPHERE 3900 Series Modems

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
To add a telephone number to a directory location, make the following selections:
Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the first
character position.)
Select F2 (
character.
Press the
Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 3-6 for a list of valid dial command modifiers.)
To save the number just entered, scroll to the next directory location by selecting Nxt. The number
is now stored in nonvolatile memory.
Table 3-9 describes what can be entered in directory locations.
3-60
02:
Nxt
F3
F1 F2
) or F3 ( ) until the desired character is selected. This can be an alpha or numeric
02:
Nxt
F1 F2 F3
key to move the cursor to the next character position.
01:9W5556789
Nxt
F1 F2 F3
November 1996 3910-A2-GN32-30