Manual Adjust/Automatic Adjust - FLIR ThermaCAM E4 Operator's Manual

9.4 – Menu system
Label
Delta alarm
Ref temp
Alarm temp
9.4.3

Manual adjust/Automatic adjust

10386703;2
Figure 9.11 Manual adjust/Automatic adjust command.
Point to Manual adjust and press MENU/YES to manually select level and span settings.
The level command can be regarded as the brightness, while the span command can
be regarded as the contrast.
Press the navigation pad up/down to change the level (indicated by an arrow
■
pointing upwards or downwards in the temperature scale)
Press the navigation pad left/right to change the span (indicated by two arrows
■
pointing away from each other or towards each other)
34
Value
N/A
User-defined
User-defined
Explanation
Enter an delta alarm value by pressing the naviga-
tion pad left/right.
➲ This label is only available if Update ref temp
has been previously selected in the Settings dialog
box.
For information purposes only.
The reference temperature is calculated and up-
dated 'on the fly'.
➲ This label is only available if Update ref temp
has been previously selected in the Settings dialog
box.
Enter a temperature value by pressing the naviga-
tion pad left/right.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004