FLIR ThermaCAM E4 Operator's Manual page 32

8.1 – Camera parts
Callout
5
6
7
10315803;4
Figure 8.2 Camera parts – view from below
Callout
1
2
3
24
Description of part
Laser LocatIR with lens cap
➲ Please note the following:
A laser icon appears on the screen when the Laser LocatIR is switched on.
■
Since the distance between the laser beam and the image center will vary by
■
the target distance, Laser LocatIR should only be used as an aiming aid. Always
check the LCD to make sure the camera captures the desired target.
Do not look directly into the laser beam.
■
When not in use, the Laser LocatIR should always be protected by the lens cap.
■
Focus ring
Lens cap
Description of part
Tripod mount
Trigger
Lid of the battery compartment
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004