External Battery Charging - FLIR ThermaCAM E4 Operator's Manual

10.2 – External battery charging
Step
1
2
3
10305803;2
Figure 10.2 Battery full symbol
10.2

External battery charging

You can also charge the battery by using the external battery charger. The battery
status during charging is indicated by a number of LEDs.
10379503;3
Figure 10.3 Stand-alone, external battery charger
44
Action
Make sure that the battery is correctly inserted into the camera.
Connect the power cable to the camera.
While charging, the battery status symbol will pulse until the battery is fully
charged. When the battery is fully charged the battery symbol will stop pulsing
and be completely filled.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004