Menu System; Navigating The Menu System; Meas. Mode; Manual Adjust/Automatic Adjust - FLIR ThermaCAM EX300 User Manual

10.4

Menu system

10.4.1

Navigating the menu system

Press MENU/YES to display the vertical menu bar
■
Press MENU/YES to confirm selections in menus and dialog boxes
■
Press PWR/NO to exit the menu system
■
Press PWR/NO to cancel selections in menus and dialog boxes
■
Press the navigation pad up/down to move up/down in menus, submenus and di-
■
alog boxes
Press the navigation pad right/left to move right/left in menus and submenus, and
■
to change values in dialog boxes
10.4.2

Meas. mode

10382303;a3
Figure 10.8 Meas. mode dialog box.
Point to Meas. mode on the vertical menu bar and press MENU/YES to display the
Meas. mode dialog box.
To change the measurement mode, press the navigation pad left/right.
■
To confirm the choice, press MENU/YES.
■
To cancel any changes, press PWR/NO
■
To set the color alarm (Off, Above, Below), press the navigation pad left/right.
■
To confirm the choice, press MENU/YES.
■
To cancel any changes, press PWR/NO
■
To set the color alarm temperature, press the navigation pad left/right.
■
To confirm the choice, press MENU/YES.
■
To cancel any changes, press PWR/NO
■
The color alarm command colors all pixels with a temperature above or below a preset
temperature level.
10.4.3

Manual adjust/Automatic adjust

Point to Manual adjust and press MENU/YES to manually select level and span set-
tings. The level command can be regarded as the brightness, while the span command
can be regarded as the contrast.
Press the navigation pad up/down to change the level (indicated by an arrow
■
pointing upwards or downwards in the temperature scale)
Publ. No. 1558439 Rev. a156 – ENGLISH (EN) – February 28, 2006
10 – Camera program
65
10