Removing The Battery - FLIR ThermaCAM E4 Operator's Manual

7.8 – Working with the camera
7.8.3.2

Removing the battery

10396503;2
Figure 7.4 Removing the battery
Step
1
2
3
For more information about the battery system, see section 10 – Electrical power
system on page 42.
22
Action
Remove the lid of the battery compartment by pressing the locking mechanism.
Remove the battery by firmly grabbing its rear end and carefully lifting it out from
the battery compartment.
Replace the lid of the battery compartment.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004