Battery Safety Warnings - FLIR ThermaCAM E4 Operator's Manual

10379603;4
Figure 10.4 LED indicators on the external battery charger
Figure 10.5 LED indicators – explanations of callouts
Situation
The charger is under power, but
no battery is inserted
The charger is under power, and
a battery is inserted
The battery is too cold or too
warm
The battery is out of order
The battery is now being
charged
10.3

Battery safety warnings

Do not place the battery in fire or heat the battery.
■
Do not install the battery backwards so that the polarity is reversed.
■
Do not connect the positive terminal and the negative terminal of the battery to
■
each other with any metal object (such as wire).
Do not pierce the battery with nails, strike the battery with a hammer, step on the
■
battery, or otherwise subject it to strong impacts or shocks.
Do not solder directly onto the battery.
■
Do not expose the battery to water or salt water, or allow the battery to get wet.
■
Do not disassemble or modify the battery. The battery contains safety and protec-
■
tion devices which, if damaged, may cause the battery to generate heat, explode
or ignite.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004
LED indicator no.
1
1
1
1
5-2
10.3 – Battery safety warnings
Color & mode
Fixed red light
Fixed green light
Flashing green light
Flashing red light
Pulsing green light from LED no.
5 to LED no. 2
Each LED represents 25 % bat-
tery capacity and will be lit ac-
cordingly.
45