FLIR ThermaCAM E4 Operator's Manual page 57

Problem
The trigger button does
not work as expected.
The trigger button does
not work at all.
When connecting the in-
frared camera to an exter-
nal video monitor, no im-
age appears.
The LCD does not display
the correct date & time.
It is not possible to store
any more images in the
camera.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004
Possible reason
The function of the trigger button may
have accidently been changed.
The trigger button may have accidentally
been disabled.
The video cable connector may not be
properly inserted into the video connector
on the camera.
The video cable connector may not be
properly inserted into the video connector
on the external monitor.
The camera may have accidentally been
set to PAL video format, while the external
video monitor is set to NTSC video format,
and vice versa.
The camera may have accidentally been
set to the wrong date & time.
The internal flash memory may be full.
Solution
Change the function of the
trigger button.
Enable the trigger button.
Verify that the video con-
nector is properly inserted.
Verify that the video con-
nector is properly inserted.
Change the video format.
Change the date & time.
To be able to save more
images, download the im-
ages to your computer us-
ing ThermaCAM Quick-
View.
49