Changing Date & Time; Working With The Camera; Removing The Lens - FLIR ThermaCAM E4 Operator's Manual

Step
3
4
5
7.7.5 Changing date & time
Step
1
2
3
4
5
7.8

Working with the camera

7.8.1

Removing the lens

➲ Please note the following:
Before trying to remove fingerprints or other marks on the lens elements, see section
■
11.2 – Lenses on page 47.
Removing an IR lens will expose very sensitive camera parts. Do not touch any ex-
■
posed parts.
Please note what is the locking ring and what is the focus ring in the figure below.
■
Trying to remove the lens by rotating the focus ring may damage the lens.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004
Action
Press the navigation pad up/down to select Time format.
Press the navigation pad left/right to change the time format.
Press MENU/YES to confirm your changes and leave the dialog box.
Action
Press MENU/YES to display the vertical menu bar.
Point to Date/time on the Setup menu and press MENU/YES.
Press the navigation pad up/down to select year, month, day, hour, minute and
second.
Press the navigation pad left/right to change each parameter.
Press MENU/YES to confirm your changes and leave the dialog box.
7.8 – Working with the camera
19