Connecting The Camera To A Wireless Local Area Network (Less Common Use); Changing The Settings; General - FLIR E6-XT User Manual

7
Operation
4. Select Wi-Fi and push the center of the navigation pad.
5. Select Share and push the center of the navigation pad.
6. (Optional step.) To display and change the parameters, select Settings and push the
center of the navigation pad.
• To change the channel (the channel that the camera is broadcasting on), select
Channel and push the center of the navigation pad.
• To activate WEP (encryption algorithm), select WEP and push the center of the
navigation pad. This will check the WEP check box.
• To change the WEP password, select Password and push the center of the navi-
gation pad.
Note These parameters are set for your camera's network. They will be used by the
external device to connect that device to the network.
7.22.2 Connecting the camera to a wireless local area network (less common
use)
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Settings
3. Select Device settings and push the center of the navigation pad.
4. Select Wi-Fi and push the center of the navigation pad.
5. Select Connect to network and push the center of the navigation pad.
6. To display a list of the available networks, select Networks and push the center of the
navigation pad.
7. Select one of the available networks.
Password-protected networks are indicated with a padlock icon, and for these you
will need to enter a password.
Note Some networks do not broadcast their existence. To connect to such a network,
select Add network... and set all parameters manually according to that network.

7.23 Changing the settings

7.23.1 General

You can change a variety of settings for the camera.
The Settings menu includes the following:
• Measurement parameters.
• Camera temperature range.
• Save options.
• Device settings.
7.23.1.1 Measurement parameters
• Emissivity.
• Reflected temperature.
• Distance.
7.23.1.2 Camera temperature range
For accurate temperature measurements, you must change the Camera temperature
range setting to suit the expected temperature of the object you are inspecting.
Available temperature range options are dependent on the camera model. The unit (℃
or ℉) depends on the temperature unit setting, see section 7.23.1.4 Device settings,
page 24.
#T559828; r. AP/56791/57153; en-US
. This displays a dialog box.
23