Table of Contents
Advertisement
Setting Up the Reader
Follow the steps below to connect and get your reader up and
communicating with its host.
1.
Configure the Base Station starting on this page.
2.
Charge the Batteries (see page 12).
3.
Link to the Base Station (see page 17).
4.
Select the Interface Type (see page 19).
5.
Configure other settings if desired starting on page 31
(optional, depends on settings needed).
Configure the Base Station
The base charger/station may be configured in desk application to
hold the reader in two different positions, either a horizontal or
standing position, in order to provide the most comfortable use
depending on needs.
Changing the Base Station Position
The base station is configured by installing one of two sets of me-
chanical parts that come with the cordless kit. The default mounts
(shown below) provide three options: vertical (wall) mounting,
standing (45°), or horizontal mounting with a higher mechanical
retention of the scanner. Use the other mounts only for horizontal
mounting, with lower retention of the scanner. The different
Quick Reference Guide
Gryphon™ I GM410X
Quick Reference Guide
Standing
Horizontal
5
Advertisement
Table of Contents
