Setting Up The Reader; Positioning The Base Station; Changing The Base Station Position - Datalogic Gryphon I GBT4400 Quick Reference Manual

Setting Up the Reader

Setting Up the Reader
Follow the steps below to connect and get your reader up and
communicating with its host.
1. Configure the Base Station starting on this page.
2. Charge the Batteries (see page 10).
3. Link to the Base Station (see page 15).
4. Select the Interface Type (see page 16).
5. Configure the Reader starting on page 28 (optional,
depends on settings needed).

Positioning the Base Station

The base station/charger may be set up in desk application to
hold the reader in two different positions, either a horizontal
or standing position, in order to provide the most comfortable
use depending on needs.

Changing the Base Station Position

The base station is configured by installing one of two sets of
mechanical parts that come with the cordless kit. The default
mounts (shown below) provide three options: vertical (wall)
mounting, standing (45°), or horizontal mounting with a
higher mechanical retention of the scanner. Use the other
mounts only for horizontal mounting, with lower retention of
the scanner. The different parts may be interchanged to cus-
tomize retention preferences.
2
Standing
A tool such as a rigid pen or a flat screwdriver can be used
to change the mounts. Do not allow it to touch the con-
tacts.
Horizontal
Gryphon™ I GBT4400