List Of Valid Variables - NetComm NTC-6908 User Manual

List of Valid Variables:

Where "x" is a profile number (1-6). If no profile is specified, variables are read for or written to for the current active profile. If a profile is specified, the variable is read for or written to for the
specified profile number ('x').
RDB VARIABLE NAME
#
link.profile.x.enable
link.profile.x.apn
link.profile.x.user
link.profile.x.pass
0
link.profile.x.auth_type
link.profile.x.iplocal
link.profile.x.status
1 link.profile.x.apn
2 link.profile.x.user
3 link.profile.x.pass
4 link.profile.x.auth_type
5 link.profile.x.iplocal
6
wwan.0.radio.information.signal_str
ength
7 wwan.0.imei
8 statistics.usage_current
9 statistics.usage_current
10 /proc/uptime
11
wwan.0.system_network_status.cur
rent_band
YML6908
www.netcommwireless.com
55
SMS VARIABLE
READ/WRITE
NAME
profile
or RW
profilex
apn or apnx RW
username or usernamex RW
password or password RW
authtype or authtypex RW
wanip or wanipx R
rssi R
imei R
usage R
wanuptime R
deviceuptime R
band R
Table 13: SMS ‐ Valid Variables
DESCRIPTION
Profile
APN
3G username
3G password
3G Authentication type
WAN IP address
3G signal strength
IMEI number
3G data usage of current
session
Up time of current 3G session
Device up time
Current 3G frequency
EXAMPLE
Read:
(profile no,apn,user,pass,auth,iplocal,status)
1,Telstra.internet,username,password, chap,202.44.185.111,up
Write:
(apn, user, pass,auth)
Telstra.internet,username,password
telstra.internet
Guest, could also return "null"
Guest, could also return "null"
"pap" or"chap"
202.44.185.111
65 dBm
359102128941027512
"Rx 500 bytes, Tx 1024 bytes, Total 1524 bytes" or "Rx 0
byte, Tx 0 byte, Total 0 byte" when wwan down
1 days 02:30:12 or 0 days 00:00:00 when wwan down
1 days 02:30:12
WCDMA 850
NTC-6000 Series User Guide