About The Web Pages (For The Administrator) - Sharp MX-M350U Operation Manual

SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE

ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)

In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the
administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right
frame that allows you to configure settings for that item. Settings that can only be configured by the administrator are
explained here.
(1)
(2)
(3)
(4)
(5)
(1) Network scanning
Configure basic settings for the network scanner
function.
(2) i-Fax
This is used to configure settings for sending and
receiving Internet faxes.
(3) Quick Setup
This is used to configure basic settings for the
SMTP, DNS, and LDAP servers.
To use the network scanner function, you must configure basic network scanner settings
(4) Services
This is used to configure advanced SMTP and
DNS server settings as needed for each
transmission method.
(5) LDAP
This is used to configure advanced settings for
global address searches.
1-6
(pages 1-7 - 1-8).