Network Configuration - Cisco 7960G Administration Manual

Chapter 7 Monitoring the Cisco IP Phone Remotely

Network Configuration

Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
Table 7-1 Device Information Area Items (continued)
Item
App Load ID
Boot Load ID
Version
Expansion Module 1
Expansion Module 2
Hardware Revision
Serial Number
Model Number
Codec
Amps
C3PO Revision
Message Waiting
The Network Configuration area on a phone's web page displays network
configuration information and information about other phone settings.
describes these items.
You can view and set many of these items from the Network Configuration Menu
the Cisco IP Phone. For more information, see
Settings on the Cisco IP Phone."
Description
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the
phone
Version of the phone hardware
Phone load ID for the first
Cisco IP Phone 7914 Expansion Module, if connected
to the phone
Phone load ID for the second
Cisco IP Phone 7914 Expansion Module, if connected
to the phone
Version of the phone hardware
Serial number of the phone
Model number of the phone
Codec used by the phone
Indicates whether 3 volt or 5 volt amplifier is being
used by the phone
Revision of the Cisco 3 port switch in the phone
Indicates if there is a voice message waiting on any
line for this phone
Chapter 4, "Configuring Network
Network Configuration
Table 7-2
7-5