Cisco 7960G Administration Manual page 94

Configuring Telephony Features Using Cisco CallManager
Table 5-1 Configuring Telephony Features Using Cisco CallManager (continued)
Feature
Configurable call
forward display
Direct transfer
Extension Mobility Enables users to sign into their directory
Forward
Group call pickup
Hold
Immediate Divert
Join
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
5-4
Description
Allows you to specify information that
appears on a phone when a call is
forwarded. This information can include the
caller name, caller number, redirected
number, and original dialed number.
Joins two established calls (calls that are on
hold or in connected state) into one call and
drops the feature initiator from the call.
Does not initiate a consultation call and
does not put the active call on hold.
number from any Cisco IP Phone.
Forwards all calls to the designated
directory number.
Allows users to pick up incoming calls
within their own group or in other groups.
Places an active call on hold.
Immediately diverts a call to a voice
messaging system. When a call is diverted,
the line becomes available to make or
receive new calls.
Allows a user to initiate an ad hoc
conference by using the Join softkey.
Join does not create a consultation call and
does not put the active call on hold. Join can
include more than two calls, which results
in a call with more than three parties. Join
supports up to 16 participants in a call.
Chapter 5 Configuring Features, Templates, Services, and Users
Reference
Refer to Cisco CallManager
Administration Guide.
Refer to Cisco CallManager
System Guide.
Refer to Cisco CallManager
Features and Services Guide.
Refer to Cisco CallManager
Administration Guide.
Refer to Cisco CallManager
•
Administration Guide.
Refer to Cisco CallManager
•
System Guide.
Requires no configuration, unless
you want to use music on hold; see
"Music-on-Hold" in this table for
information.
Refer to Cisco CallManager
Features and Services Guide.
See the
•
Templates" section on
page
Refer to Refer to Cisco
•
CallManager Administration
Guide.
"Configuring Softkey
5-9.
OL-4825-01