Cisco 7960G Administration Manual page 86

Network Configuration Menu Options
Table 4-2 Network Configuration Menu Options (continued)
Option Description
SW Port Speed and duplex of the switch port.
Configuration
If the phone is connected to a switch,
you must configure port on the switch
to the same speed/duplex as the phone,
or configure both to auto-negotiate.
If you change the setting of this option,
you must change the PC Port
Configuration option to the same
setting.
PC Port Speed and duplex of the PC port. Valid
Configuration values:
If the phone is connected to a switch,
you must configure port on the switch
to the same speed/duplex as the phone,
or configure both to auto-negotiate.
If you change the setting of this option,
you must change the SW Port
Configuration option to the same
setting.
TFTP Server 2 Optional backup TFTP server that the
phone uses if the primary TFTP server
is unavailable.
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
4-12
Chapter 4 Configuring Network Settings on the Cisco IP Phone
To Change
Scroll to the SW Port Configuration
1.
option and then press the Edit
softkey.
Enter one of these values:
2.
A (Auto Negotiate)
–
10H (10-BaseT / half duplex)
–
10F (10-BaseT / full duplex)
–
100H (100-BaseT / half duplex)
–
100F (100-BaseT / full duplex)
–
3. Press press the Save softkey.
Scroll to the PC Port Configuration
1.
option and then press the Edit
softkey.
Enter one of these values:
2.
A (Auto Negotiate)
–
10H (10-BaseT / half duplex)
–
10F (10-BaseT / full duplex)
–
100H (100-BaseT / half duplex)
–
100F (100-BaseT / full duplex)
–
Press press the Save softkey.
3.
Set the Alternate TFTP option to Yes.
1.
Scroll to the TFTP Server 2 option,
2.
press the Edit softkey, and then enter
a new backup TFTP server IP
address.
3. Press the Validat. softkey, and then
press the Save softkey.
OL-4825-01