Chapter 3
Setting Up the Cisco IP Phone
1
AC/DC adapter port (DC48) for power
connector (for phones not provided with
inline power)
2
Power supply with AC plug
3
Power cable with wall socket plug for
connecting to power
4
Network port (10/100 SW) for connecting to
the network
Adjusting Placement of the Cisco IP Phone
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
Related Topics
•
Adjusting Placement of the Cisco IP Phone, page 3-9
Verifying the Phone Startup Process, page 3-12
•
Configuring Startup Network Settings, page 3-13
•
Configuring Security on the Cisco IP Phone, page 3-13
•
The Cisco IP Phone includes an adjustable footstand. When placing the phone on
a desktop surface, you can adjust the tilt height to several different angles in 7.5
degree increments from flat to 60 degrees.You can also mount these phones to the
wall using the footstand or using the optional locking accessory.
Related Topics
Adjusting Cisco IP Phone Placement on the Desktop, page 3-10
•
Mounting the Phone to the Wall, page 3-10
•
Adjusting Placement of the Cisco IP Phone
5
Access port (10/100 PC) for connecting your
phone to your PC
6
Handset port for connecting the handset
7
Headset port for connecting a headset
3-9