Speakerphone; Safety And Performance; Safety; Using External Devices With Your Cisco Ip Phone - Cisco 7960G Administration Manual

Before You Begin

Speakerphone

Safety and Performance

Safety

Warning
Warning
Warning
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
3-4
By default, the speakerphone is enabled on Cisco IP Phones. However, you can
disable it on Cisco IP Phone models 7960G and 7940G.
To disable the speakerphone on these models, choose Device > Phone from the
Cisco CallManager Administration application, locate the phone you want to
modify, and check the Disable Speakerphone check box.
The following sections include important safety and performance information that
you should review before you install and use your Cisco IP Phone:
Safety, page 3-4
•
Using External Devices with Your Cisco IP Phone, page 3-5
•
Review the following warnings before installing the Cisco IP Phone. To see
translations of these warnings, refer to the Regulatory Compliance and Safety
Information for the Cisco IP Phone 7900 Series document that accompanied this
device.
Read the installation instructions before you connect the system to its power
source.
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Ultimate disposal of this product should be handled according to all national
laws and regulations.
Chapter 3 Setting Up the Cisco IP Phone
OL-4825-01