Appendix; Updating Firmware For The Cisco Ip Phone - Cisco 7960G Administration Manual

Updating Firmware for the
Cisco IP Phone
You update the firmware on a Cisco IP Phone using the Cisco CallManager
Administration application. You cannot update the firmware from the
Cisco IP Phones directly.
To determine the firmware version that is currently running on a phone, see the
"Status Menu" section on page
To update firmware, perform the following steps.
Read the "Read Me" files included with Cisco software updates. These files
Note
provide important updated information about installing and configuring the new
software.
Procedure
Obtain an updated phone load.
Step 1
You can download the latest available software from the Cisco Service & Support
Software Center:
http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml
Install the updated phone load.
Step 2
From the Cisco CallManager Administration choose System > Device Defaults
Step 3
and locate the Device Type field corresponding to the model IP Phone.
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
A P P E N D I X
6-3.
C
C-1