Cisco 7960G Administration Manual page 95

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Configuring Telephony Features Using Cisco CallManager (continued)
Feature
Malicious caller
identification
(MCID)
Meet-Me
conference
Message waiting
Multilevel
Precedence and
Preemption
(MLPP)
Music-on-
hold
Privacy
Quality Reporting
Tool
Redial
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
OL-4825-01
Description
Allows you to report a call of a malicious
nature by requesting that
Cisco CallManager identify and register the
source of an incoming call in the network.
Enables other callers to join in a
conference.
Indicates that one or more voice messages
are waiting for a user.
Allows properly validated users to place
priority calls. If necessary, users can
preempt lower-priority phone calls. Also
allows the use of the call-forward alternate
party (CFAP) feature for forwarding a
precedence call.
Plays music while callers are on hold.
Enables or disables whether users with
phones that share the same line can view
call status and can barge a call.
Allows users to use the QRT softkey on a
phone to submit information about problem
phone calls.
Redials the last number dialed on the
Cisco IP Phone.
Configuring Telephony Features Using Cisco CallManager
Reference
Refer to Cisco CallManager
Features and Services Guide.
Refer to Cisco CallManager
Administration Guide.
Refer to Cisco CallManager
•
Administration Guide.
Refer to Cisco CallManager
•
System Guide.
Refer to Cisco CallManager
Features and Services Guide for
configuration procedures.
Refer to Cisco CallManager
Features and Services Guide.
Refer to Cisco CallManager
Features and Services Guide for
system requirements,
configuration instructions, and use
information.
Refer to Cisco CallManager
Administration Guide.
Requires no configuration.
5-5