Cisco 7960G Administration Manual page 106

Status Menu
Table 6-1 Status Messages on the Cisco IP Phone Models 7960G and 7940G
Message
BootP server used
File auth error
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
6-4
Chapter 6
To exit the Status Messages screen, press the Exit softkey.
Description
The phone obtained its IP
address from a BootP server
rather than a DHCP server.
An error occurred when the
phone tried to validate the
signature of a signed file. This
message includes the name of
the file that failed.
Viewing Model Information, Status, and Statistics, on the Cisco IP Phone
Possible Explanation and Action
None. This message is informational only.
The file is corrupted. If the file is a phone
•
configuration file, delete the phone from
the Cisco CallManager database using
Cisco CallManager Administration. Then
add the phone back to the
Cisco CallManager database using
Cisco CallManager Administration.
There is a problem with the CTL file and
•
the key for the server from which files are
obtained is bad. In this case, run the CTL
client and update the CTL file, making
sure that the proper TFTP servers are
included in this file.
OL-4825-01