Cisco 7960G Administration Manual page 126

Network Configuration
Table 7-2
Item
DHCP Enabled
DHCP Address
Released
Alternate TFTP
Erase Configuration
Forwarding Delay
Idle URL
Idle URL Time
Authentication URL
Proxy Server URL
PC Port Disabled
SW Port Configuration Speed and duplex of the switch port, where:
Cisco IP Phone Administration Guide for Cisco CallManager 4.0, Cisco IP Phones 7960G/7940G
7-8
Network Configuration Area Items (continued)
Description
Indicates whether DHCP is being used by the phone.
Indicates the setting of the DHCP Address Released
option on the phone's Network Configuration menu.
Indicates whether the phone is using an alternative
TFTP server.
Indicates the setting of the Erase Configuration option
on the phone's Network Configuration menu.
Indicates whether the internal switch begins
forwarding packets between the PC port and the switch
port on the phone when the phone becomes active.
URL that the phone displays when the phone has not
been used for the time specified by Idle URL Time.
Amount of time in seconds that elapses before the URL
shown in Idle URL appears.
URL that the phone uses to validate requests made to
the phone web server.
URL used to proxy HTTP requests for access to
non-local host addresses from the phone HTTP client.
Indicates whether the PC port on the phone is enabled
or disabled.
A—Auto Negotiate
•
10H—10-BaseT / half duplex
•
10F—10-BaseT / full duplex
•
100H—100-BaseT / half duplex
•
100F—100-BaseT / full duplex
•
No Link—No connection to the switch port
•
Chapter 7 Monitoring the Cisco IP Phone Remotely
OL-4825-01