Usb Setting - Sam4s NR-500 Series Operating And Programming Manual

RS232C Settings Screen Program Notes
BAUD RATE
PARITY
DATA BITS
STOP BITS
DEVICE FUNCTION
PRINTER TYPE
KP START LINE (0-20)
KP END LINE (0-20)
SLIP START LINE (0-20)

USB Setting

Note: If you select other types, Your NR-500 series will be rebooted by itself.
USB Specifications
PC-COM
SCANNER
MEMORY
94 • Service Mode Programming
Option
1. At the SERVICE MODE, press 5 and CASH for DEFINE PORT.
2. From the DEFINE PORT screen, press 3 and CASH for USB TYPE.
↑ ↑ ↑ ↑
3. Press the key and the
confirm
US B TY PE
DE VIC E: M EM ORY
M EM OR Y
USB TYPE
For connecting PC
For using scanner
For backup & restore
Description
Select 1200, 2400, 4800, 9600, 19200, 38,400,
57,600, or 115,200 from the screen, 9600 is default.
Select NONE, EVEN or ODD, NONE is default.
Select 8 or 7 from the screen, 8 is default.
Select 1 or 2 from the screen, 1 is default.
Select NONE, PC, PRINTER, SCANNER or POLE
from the screen, NONE is default.
Select the printer type connected to this port.
Enter the number of KP START LINE.
Enter the number of KP END LINE.
Enter the number of SLIP START LINE.
↓ ↓ ↓ ↓
key to select usb type and press the CASH key to
USB VERSION
-
USB 2.0
(only HID type)
USB 2.0
SPEED
-
FULL SPEED
FULL SPEED
SAM4S NR-500 Series Manual