Sam4s NR-500 Series Operating And Programming Manual page 98

Note: If you are Using an SD Card for the First Time . . .
NOTE: SD cards must be formatted as FAT 32.
CAUTION: Formatting the SD card will clear all data on the SD card and prepare it for
use.
1. Start Windows Explorer.
2. Select the SD card drive, right click and select Format. (Win XP screen shown;
slightly different procedures are used with different operating systems.)
3. From the Format dialog you must select the
File System: FAT32.
98 • Service Mode Programming
Select
"Format..."
SAM4S NR-500 Series Manual