Macro Key Programming - Sam4s NR-500 Series Operating And Programming Manual

Macro Key Programming

Macro keys may be programmed to record, and then later perform, up to 50 keystrokes.
For example, a macro key could be set to tender (preset tender) a common currency, such
as ￡ 5 into the cash key. Use this program to record keystrokes for each of the 10
possible macro keys.
148 • Program Mode Programming
1. From the PROGRAM MODE, press 3 and CASH for FUNCTION KEY.
The FUNCTION KEY PROGRAM screen displays:
F UN CT IO N K EY
1. FUN CT IO N KE Y
2. MAC RO K EY
2. From the FUNCTION KEY screen, press 2 and CASH for MACRO. The
MACRO PROGRAM screen displays:
MA CR O KE Y
EN TER M AC RO K EY
TO BE P RO GR AM MED
3. Press the macro key(MACRO1 – MACRO10) that you wish to program.
The screen diplays Macro descriptor. Press the CASH key to make macro line.
MA CR O1
MA CRO 1
4. The screens displays the first macro line:
M AC RO 1
EN TER F UN C. KE Y
1:
5. Press the first key of the macro sequence, Type up to 50 key stokes. For
example, press 5 (numeric five): and CASH.
M AC RO 1
EN TER F UN C. KE Y
2:
6. Press the same MACRO key to end the sequence.
7. Continue to program additional MACRO key sequence or press CLEAR key
to return to PROGRAM MODE screen.
MA CR O1
C AS H
SAM4S NR-500 Series Manual