Control Lock - Sam4s NR-500 Series Operating And Programming Manual

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with a full
sets of keys.
VOID
Before performing any operations in Register Mode a clerk must be signed on. See
"Clerk Sign-On/Sign-Off" for a description of clerk operations.
Control Keys
All NR-500 Series models include a full sets of keys that may be used to access the
following control lock positions.
Note: Keys may be removed from the control lock in the OFF or REG positions.
20 • Introduction
OFF
REG
X
Z
PGM
S
Key Positions Accessible
REG OFF, REG
VD VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
P VOID, OFF, REG, X, Z, PGM
C ALL POSITIONS
VOID Use to void (correct) items outside of a sale.
OFF The register is inoperable.
REG
Use for normal registrations.
X
Use to read register reports.
Z Use to read register reports and reset totals to
zero.
PGM Use to program the register.
S The S position is a hidden position reserved for
dealer access.
SAM4S NR-500 Series Manual