Page 1
ER-390M Electronic Cash Register AU Operation and Program Manual All specifications are subject to change without notice JK68-60962J(Rev.03) From ER-390M v1.000 to v1.026...
Page 2
ATTENTION The product that you have purchased contains a rechargeable Ni-MH battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials for details concerning recycling options or proper disposal WARNING This is a Class A product.
Precaution Statements Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. Safety Precautions 1. Be sure that all built-in protective devices are 6. Observe the original lead dress, especially near the replaced.
Page 4
Servicing Precautions WARNING: First read the-Safety Precautions-section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. WARNING: An electrolytic capacitor installed with the wrong polarity might explode. 1. Servicing precautions are printed on the cabinet. 5.
Page 7
Program 450 - PLU MIX & MATCH Programming ..........101 System Option Programming....................102 Program 30 - System Option Programming ............102 System Option Table ....................103 Note: Price Embedded Barcode Format ..............106 Print Option Programming ....................107 Contents • iii ER-390M Electronic Cash Register AU...
Page 8
Program 610 - Mix & Match Description Programming.........152 Group Programming ......................153 Program 900 - Group Status Programming .............153 Program 910 - Group Descriptors Programming.............154 Miscellaneous Programming ....................155 Program 1500 - Macro Key Sequence Programming..........155 iv • Contents ER-390M Electronic Cash Register AU...
Page 9
Program Scans ........................168 Program 15 - Program Scans................... 168 Sample Reports Financial ..........................171 Time............................175 PLU............................176 Clerk ............................177 Individual Clerk........................178 Groups ........................... 179 Stock ............................180 Open Check ........................... 181 Contents • v ER-390M Electronic Cash Register AU...
ER-390M, with its superb thermal printing system, always provides the fastest in tancialaction speeds. • ER-390M is preset with 10% GST and Australian rounding as well as a number of other useful functions. Getting Started •1 ER-390M Electronic Cash Register AU...
4. Plug the register into a grounded outlet (three prong), insert a control key and turn the key to the REG control lock position. *A paper takeup spindle + motor kit is available if Jornal mode is required. Installing the Paper 1. Remove the printer cover. 2• Getting Started ER-390M Electronic Cash Register AU...
Page 13
2. Push the blue cap lever and then lift up to open the paper cover. Getting Started •3 ER-390M Electronic Cash Register AU...
Page 14
3. Ensure that the paper is being fed from the bottom of the roll. 4. Put the leading edge of the paper over the printer 5. Close the paper cover slowly until it locks firmly 4• Getting Started ER-390M Electronic Cash Register AU...
Page 15
※ If you wish to use the printer to print a sales journal or electronic journal, insert the paper into the paper take-up spool. Wind the paper two or three turns around the spool shaft and install the spool in the mount. Getting Started •5 ER-390M Electronic Cash Register AU...
For direct registrations, 60 PLU keys are on the keyboard. • 18 character programmable descriptors for PLUs and functions. • Up to 99 PLU Group totals. • Up to 99 clerks with separate report totals. 6• Getting Started ER-390M Electronic Cash Register AU...
Front Display The ER-390M comes with a liquid crystal screen, allowing you to view up to 2 lines of information with up to 16 characters per line. The display is backlit and to provide excellent visibility, regardless of lighting conditions.
The number of times an item has been repeated is displayed Item Count Amount The amount of the item, subtotal or total, is displayed in the rightmost portion of the display Rear Display Message Change Due Negative Entry Subtotal 8• Getting Started ER-390M Electronic Cash Register AU...
Page 19
Total of Sale Numbered Error Conditions Getting Started •9 ER-390M Electronic Cash Register AU...
RECEIPT PRINTER PAPER END OFF LINE PRINTER COVER OPEN SLIP CHG SLIP PAPER END. CHANGE NEW SLIP PAPER (When using slip printer.) SYSTEM ERROR (If this problem occurs, call the service engineer.) 10• Getting Started ER-390M Electronic Cash Register AU...
Before performing any operations in Register Mode a clerk must be signed on. See “Clerk Sign- On/Sign-Off” for a description of clerk operations. Control Keys The ER-390M includes two sets of keys that may be used to access the following control lock positions. Positions Accessible VOID √...
Keyboards The ER-390M keyboard includes 90 key positions with the default legends and key assignments as shown below. This configuration has 60 keyboard NLU locations. The keyboard legend sheet can be replaced by lifting the protective plastic cover. Programmable key locations are shown with a bold border.
(C-Key) only to those you may want to perform these functions. Perform "Clear All Totals", or "Clear PLU File" if you wish to clear only parts of ER-390M memory. Complete clearing of all memory areas and installation of the default program can be done...
3. Press and hold the key position where the SBTL key is located on the default keyboard layout. 4. While continuing to hold the SBTL key, turn the power switch to the ON position. 5. The message "INITIAL CLEAR OK!” prints when the initial clear is complete. 14• Getting Started ER-390M Electronic Cash Register AU...
OFF. Use to allow cash out function when EFTPOS terminal is connected and activated. 0(zero) CASH OUT amount cash out will generate a sequence error. This function only allowed within a sale. Operating Instructions •15 ER-390M Electronic Cash Register AU...
Page 26
PLU. For example, an item not food stamp eligible can be made food stamp eligible. Displays the amount of the sale that is food stamp eligible. F/S SUB Use to tender food stamps for eligible sales. F/S TEND 16• Operating Instructions ER-390M Electronic Cash Register AU...
Page 27
(New Balance) Displays subtotal of sale including tax. Must be pressed prior to a sale discount or sale surcharge. SUBTOTAL Tracks the current balance for a guest check or table. TABLE # Operating Instructions •17 ER-390M Electronic Cash Register AU...
Page 28
The percent rate may be entered or preprogrammed, or the percent keys can be programmed discount or with a negative open or preset price, thus acting as coupon keys. surcharge) A percentage key may also be set up to accept charge tip entries. 18• Operating Instructions ER-390M Electronic Cash Register AU...
Operations” in Operation Instructions), to sign on a clerk is enter the clerk code then press the CLERK key. CLERK Clerk Code (up to 6 digits) To sign the clerk off, enter 0 (Zero) and press the CLERK key. CLERK Operating Instructions •19 ER-390M Electronic Cash Register AU...
2. To turn the receipt off, enter 9 9, press the SBTL key. Enter 1, press CASH. SBTL CASH 3. To turn the receipt on, enter 9 9, press the SBTL key. Enter 0, press CASH. SBTL CASH 20• Operating Instructions ER-390M Electronic Cash Register AU...
Item Registrations All registrations on ER-390M are made into open or preset PLUs. • In place of traditional PLU keys, some PLUs are located directly on the keyboard. • When more items or categories are needed than the number of PLUs available on the keyboard, registrations can be into PLUs by entering the PLU code number and pressing the PLU key on the keyboard or by using a barcode scanner.
Programming" in the "Program Mode Programming" chapter to program preset prices. Receipt Example: 1. Press a preset PLU. THANK-YOU For example, press PLU 5: CALL AGAIN DATE 15/01/2003 WED TIME 08:33 PLU5 $1.29 TOTAL $1.29 CASH $1.29 CLERK 1 No.000011 00001 22• Operating Instructions ER-390M Electronic Cash Register AU...
CASH $6.34 For example, press PLU 1: CLERK 1 No.000011 00001 3. To register a second item exactly as the first, press the PLU a second time. For example, press PLU 1: Operating Instructions •23 ER-390M Electronic Cash Register AU...
For example, enter 4 on the numeric key DATE 15/01/2003 WED TIME 08:33 pad. @1.99 PLU1 T1 $7.96 $0.48 TOTAL $8.44 2. Press a PLU. CASH $8.44 CLERK 1 No.000011 00001 For example, press PLU 1: 24• Operating Instructions ER-390M Electronic Cash Register AU...
2. Enter an amount on the number pad. Do CASH $3.93 not use the decimal key. CLERK 1 No.000011 00001 For example, if the price is $.99 per kilo, enter: 3. Press a PLU. For example, press PLU 1: Operating Instructions •25 ER-390M Electronic Cash Register AU...
THANK-YOU a price and press a single item open CALL AGAIN PLU.) DATE 15/01/2003 WED TIME 08:33 For example, press PLU 6: PLU6 $1.29 TOTAL $1.29 CASH $1.29 CLERK 1 No.000011 00001 26• Operating Instructions ER-390M Electronic Cash Register AU...
Receipt Example: 1. Enter the PLU number; press the PLU THANK-YOU key. CALL AGAIN For example, enter: DATE 15/01/2003 WED TIME 08:33 PLU1 $1.29 TOTAL $1.29 CASH $1.29 CLERK 1 No.000011 00001 Operating Instructions •27 ER-390M Electronic Cash Register AU...
TIME 08:33 PLU1 T1 $2.99 PLU1 T1 $2.99 $0.36 2. To register a second item exactly as the TOTAL $6.34 first, press the PLU key again. CASH $6.34 CLERK 1 No.000011 00001 28• Operating Instructions ER-390M Electronic Cash Register AU...
DATE 15/01/2003 WED TIME 08:33 enter: 3.75X @2.99 PLU3 T1 $11.21 X/TIME $0.67 TOTAL $11.88 2. Enter the PLU number; press the PLU CASH $11.88 key. CLERK 1 No.000011 00001 For example, enter: Operating Instructions •29 ER-390M Electronic Cash Register AU...
$2.11 CLERK 1 No.000011 00001 For example, if the items are priced 3 for $1.00, enter: X/T IME 3. Enter the PLU number; press the PLU key. For example, enter: P LU 30• Operating Instructions ER-390M Electronic Cash Register AU...
TOTAL $12.68 CASH $12.68 3. Enter an amount on the number pad. Do CLERK 1 No.000011 00001 not use the decimal key. For example, for $2.99, enter: 4. Press the PLU key. Operating Instructions •31 ER-390M Electronic Cash Register AU...
#3210987654321 T1 $2.99 $0.72 For example, for $2.99, enter: TOTAL $12.68 CASH $12.68 CLERK 1 No.000011 00001 4. Press the PLU key. 5. For additional identical items, press more PLU key(s). 32• Operating Instructions ER-390M Electronic Cash Register AU...
1 will add the digit 1 to the fourth PLU # position, resulting in the registration of PLU #1001. 4. Press another PLU. In this example press PLU 2 with a price of $1.50. Operating Instructions •33 ER-390M Electronic Cash Register AU...
$2.00 for price level 2. 4. Press another PLU. In this example press PLU 2 programmed to register PLU #2 with price level 1. Note that the level 1 price is registered. 34• Operating Instructions ER-390M Electronic Cash Register AU...
2. Press the PROMO key. The message TOTAL $0.00 "PROMO" displays. CASH $0.00 CLERK 1 No.000011 00001 PROMO 3. Press PLU 1 again. You cannot enter an item that has not been already registered in this transaction. Operating Instructions •35 ER-390M Electronic Cash Register AU...
$1.25 2. Enter the item or items that are wasted. PLU2 $1.50 ***WASTE*** 3. Press the WASTE key again to total the TOTAL $2.75 wasted items: CLERK 1 No.000011 00001 WAST E 36• Operating Instructions ER-390M Electronic Cash Register AU...
So, if you want to discount items but not every item in a sale, you will need two % keys. To discount on the whole sale, you will need to press SUBTOTAL first. Operating Instructions •37 ER-390M Electronic Cash Register AU...
PLU2 $10.00 For example, for one third off enter: -33.333% AMOUNT -3.33 TOTAL $6.67 CASH $6.67 CLERK 1 No.000011 00001 3. Press the %1 key: 4. The discount is automatically subtracted. 38• Operating Instructions ER-390M Electronic Cash Register AU...
Surcharge on Item or Sale. Of course a override rate can be put in manually. Please refer to operation sequences on previous. For setting, please refer to % (1 ~ 5) (Discounts or Surcharges) in Function Key Programming in Program Mode Programming for more detail. Operating Instructions •39 ER-390M Electronic Cash Register AU...
CALL AGAIN then press the appropriate % key. DATE 15/01/2003 WED TIME 08:33 For example: PLU1 $10.00 -2.00 TOTAL $8.00 CASH $8.00 CLERK 1 No.000011 00001 3. The discount is automatically subtracted. 40• Operating Instructions ER-390M Electronic Cash Register AU...
PLU key where PLU2 T1 -2.99 it was registered originally. GST AMT -0.18 TOTAL -3.17 CASH -3.17 CLERK 1 No.000011 00001 3. Total the sale with CASH, CHECK, or a CHARGE function. Operating Instructions •41 ER-390M Electronic Cash Register AU...
VOID ---------------------------- 3. Enter the price of the first item, and then PLU2 -1.29 press the PLU where it was registered GST AMT $0.14 originally. TOTAL $2.43 CASH $2.43 CLERK 1 No.000011 00001 42• Operating Instructions ER-390M Electronic Cash Register AU...
3. All totals and counters are corrected as if CASH -3.43 the original transaction did not take CLERK 1 No.000011 00001 place. NB. Be sure to turn the key back when finished. Operating Instructions •43 ER-390M Electronic Cash Register AU...
CH ECK 4. Enter the charge amount received, press CHARGE1 CHARGE 5. You can continue to itemize receipts, or you can finalize by pressing or selecting the same received on account key. Operating Instructions •45 ER-390M Electronic Cash Register AU...
CH ECK 4. Enter the charge amount received, press CHARGE1 CHARGE 5. You can continue to itemize paid outs, or you can finalize by pressing or selecting the same paid out key. 46• Operating Instructions ER-390M Electronic Cash Register AU...
Programming" in the "Program Mode Programming" chapter. Separate totals will be maintained on the financial report to detail sales counts and amounts for each key. These keys will also print the description at the top of a KP docket. Operating Instructions •47 ER-390M Electronic Cash Register AU...
2. To total a cash sale, press CHECK: CALL AGAIN DATE 15/01/2003 WED TIME 08:33 CHECK PLU2 $7.96 TOTAL $7.96 3. The display will indicate the total amount CHECK $7.96 of the cash sale. CLERK 1 No.000011 00001 48• Operating Instructions ER-390M Electronic Cash Register AU...
3. Press CHECK: TOTAL $14.30 CHECK $20.00 CHECK CHANGE $5.70 CLERK 1 No.000011 00001 4. The display will indicate the total amount of the check tendered and the change due, if any. Operating Instructions •49 ER-390M Electronic Cash Register AU...
4. Enter the amount of check tendered by the customer. For example, enter $10.00 and press CHECK: CH ECK 5. When the total tendered equals or exceeds the total due, the receipt will print and the transaction is complete. 52• Operating Instructions ER-390M Electronic Cash Register AU...
The currency symbol you program $5.17 change due. The change due is will display here. See "Print Option computed in home currency! Programming" in the "Program Mode Programming" chapter. Operating Instructions •53 ER-390M Electronic Cash Register AU...
(Restaurant Bill) system. (You must select hard or soft check posting in Memory Allocation Programming - the default selection is soft.) There are two methods in ER-390M to manage check track. One is table management system and the other is clerk interrupt system. If you want to use clerk interrupt system.
NOTE: If a table number entry is required for all guest checks, and checks are assigned by register, the check will be assigned by the register when the table # is entered. Operating Instructions •55 ER-390M Electronic Cash Register AU...
Page 66
If programmed to do so, CLERK 1 No.000012 00001 the PRINT CHECK key will automatically service the check: PRINT CHECK The number of times each check has been printed is counted and printed on the check 56• Operating Instructions ER-390M Electronic Cash Register AU...
Page 67
3. Pay the balance, as you would normally tender a transaction, with CASH, CHECK, or one of the CHARGE keys. If the tender is greater than the balance due, change is displayed. CAS H Operating Instructions •57 ER-390M Electronic Cash Register AU...
Page 68
T ABLE CLERK 1 No.000013 00001 2. To enter a Deposit or Account payment, simply enter the amount given and press the tender type followed by the SERVICE key: CASH SE RVIC E 58• Operating Instructions ER-390M Electronic Cash Register AU...
Page 69
CASH, CHECK, or one of the CHARGE keys. If the tender is greater than the balance due, change is displayed. P AY ME NT CASH Operating Instructions •59 ER-390M Electronic Cash Register AU...
CHECK # #123 2. Register the next items you wish to sell. PBAL $17.00 GARLIC BREAD $2.00 3. To total the posting, press SERVICE: SERVICE $2.00 BFWD $19.00 SERVICE CLERK 1 No.000012 00001 60• Operating Instructions ER-390M Electronic Cash Register AU...
Page 71
#123 2. Enter the amount given and press the PBAL $19.00 tender type followed by the SERVICE CASH $15.00 key. BFWD $4.00 CHK # : 2 CLERK 1 No.000013 00001 CASH SERVICE Operating Instructions •61 ER-390M Electronic Cash Register AU...
Page 72
$3.00 CHECK, or one of the CHARGE CHK # : 2 functions. If the tender is greater than the CLERK 1 No.000013 00001 balance due, change is displayed. PAYM E NT CASH 62• Operating Instructions ER-390M Electronic Cash Register AU...
Page 73
____BFWD__________________#4.00 No.000013_REG_01_CLERK_1______TIME_08:33 No.000013_REG_01_CLERK_1______TIME_08:33 DATE___________15/01/2003____________WED ____CHECK #_________________#123 ____PBAL_______________________$4.00 ____CHECKS_PAID_______________$22.00 ____CASH______________________$25.00 ____CHANGE_____________________$3.00 No.000014_REG_01_CLERK_1______TIME_08:33 NOTE: If Date is not printing on the slip, please refer to “Print Option Programming” option #27-2 in “Program Mode Programming”. Operating Instructions •63 ER-390M Electronic Cash Register AU...
Enter the price per kilo on the TOTAL $4.77 number pad. Do not use the decimal key. CASH $4.77 CLERK 1 No.000011 00001 For example, for $3.00, enter: 4. Press a PLU. For example, press PLU 1: 64• Operating Instructions ER-390M Electronic Cash Register AU...
Enter the price per kilo on the number pad. Do not use the decimal key. For example, for $3.00, enter: 5. Press a PLU. For example, press PLU 1: Operating Instructions •65 ER-390M Electronic Cash Register AU...
Enter the price per kilo on the number pad. Do not use the decimal key. For example, for $3.00, enter: 6. Press a PLU. For example, press PLU 1: 66• Operating Instructions ER-390M Electronic Cash Register AU...
3. Enter the price per kilo on the number CASH $4.77 pad. Do not use the decimal key. CLERK 1 No.000011 00001 For example, for $3.00, enter: 4. Press a PLU. For example, press PLU 1: Operating Instructions •67 ER-390M Electronic Cash Register AU...
Some register operations may be programmed to require the control lock in the X position in order to operate. All reports require a key that will access the X or Z position. X/Z Mode •69 ER-390M Electronic Cash Register AU...
1. Refer to the “Report Table“ and “Electronic Journal Table”. 2. Select a report type and the report mode. 3. Turn the control lock to the position indicated. 4. Enter the key sequence for the report you have selected. 70• X/Z Mode ER-390M Electronic Cash Register AU...
PRINT EJ 307 -SBTL EC/VOID PRINT EJ 308 -SBTL NO SALE PRINT EJ 309 –SBTL CANCEL PRINT EJ BY 401 – 15 401-415(depends on Max Clerk)-SBTL CLERK EJ RESET 399- SBTL (No Printing) 72• X/Z Mode ER-390M Electronic Cash Register AU...
Program 10 - Reset Hard Check Line # Programming 1. Reset All Hard Check Line #. SBTL CASH 2. Reset an Individual Hard Check Line #. SBTL Chk# CASH This resets the auto line find function on the slip printer. X/Z Mode •73 ER-390M Electronic Cash Register AU...
$118.76 DIFFERENCE $0.00 3. Enter the total of cash. CLERK 1 No.000001 00000 C ASH 4. Enter the total of checks. CHECK 5. Press the CASH key to total the declaration. CASH 74• X/Z Mode ER-390M Electronic Cash Register AU...
Program 50 - EPROM Information • Program 60 - Memory Allocation Programming / Scan • Program 70 - Function Key Assignment Programming • Program 8x - RS232C Serial Ports Communication Options Service Mode Programming •75 ER-390M Electronic Cash Register AU...
3. Press CASH key. CASH PC Online Mode In ER-390M, there are no special commands to enter PC Online Mode. When you want to enter PC Online mode, all you have to do is to set 232 Communication Option in Programming.
5. If you want to finish memory allocation, press CASH key again with no numeric key input. If you want to allocate another memory area, repeat step 3 and 4. CASH Service Mode Programming •77 ER-390M Electronic Cash Register AU...
EPROM Information Program 50 - EPROM Information 1. Turn the control lock to the S-Mode. 2. To Scan EPROM Information, enter 5 0, and then press the SBTL key. SBT L 78• Service Mode Programming ER-390M Electronic Cash Register AU...
3. Refer to Function Key Codes to find the code for the key you wish to assign, press the location you wish to program. Repeat this step to assign another key. Location Key Code 4. Press CASH key to finalize key assignment program. CASH Service Mode Programming •79 ER-390M Electronic Cash Register AU...
All programming (unless otherwise noted) is done with the control lock in the PGM-Mode. Each section details a specific area of register programming. • The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST already. Program Mode Programming •85 ER-390M Electronic Cash Register AU...
During descriptor programming, the keyboard button functions changes to the layout shown below. ER-390M Alpha Keyboard Overlay & X/ TI ME SBTL BACK • < > CAPS DO UBLE SPACE CASH SPACE 86• Program Mode Programming ER-390M Electronic Cash Register AU...
Tax Programming The ER-390M has the capability to support four separate taxes. Taxes can be calculated as either a straight percentage rate of between 0.001% and 99.999%, or a 60 break point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added tax (VAT) that is included in the price of the item.
Page 99
T AX CASH (1/2/3/4) Tax Rate You must enter decimal type Info The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST already. Program Mode Programming •89 ER-390M Electronic Cash Register AU...
PLU will automatically trigger registration of the linked PLU. • Program 400 - PLU Delete Programming allows you to delete the PLU. • Program 450 - PLU Mix & Match Programming. 90• Program Mode Programming ER-390M Electronic Cash Register AU...
N9, i.e. auto tare by number 1, just enter 1.) Australian GST status is preset by default. X/TIME 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •91 ER-390M Electronic Cash Register AU...
Page 102
Yes = 0 Print item’s price on receipt? No = 1 Yes = 0 Print item’s price on check? No = 2 Yes = 4 PLU is disabled PROMO function? No = 0 92• Program Mode Programming ER-390M Electronic Cash Register AU...
Page 103
PLU counter is not reset when a PLU Z report is Yes = 1 No = 0 done? Yes = 2 PLU is preset override in MGR control? No = 0 Default values have been highlighted in bold print Program Mode Programming •93 ER-390M Electronic Cash Register AU...
PLU is used for scale entry (using an optional scale). Enter 0 to disable automatic tare subtraction, follow with X/TIME key. X/TIME 5. Program additional PLUs, repeat from step 3, or press the CASH key to finalize the program CASH 94• Program Mode Programming ER-390M Electronic Cash Register AU...
0 3 0 0 0 0. Then press the X/TIME key. X/TIME Group Group Group 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •95 ER-390M Electronic Cash Register AU...
If the PLU Price Level is 2, repeat this with level 2 price again (or enter $0.00 price). X/TIME Price/HALO 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH 96• Program Mode Programming ER-390M Electronic Cash Register AU...
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME key. X/T IME Stock Amount 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •97 ER-390M Electronic Cash Register AU...
Type up to 18 X/TIME descriptor keys Enter up to 18 X/T IME three-character codes 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH 98• Program Mode Programming ER-390M Electronic Cash Register AU...
Enter the PLU#, up to 15 digits If you want to unlink, 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •99 ER-390M Electronic Cash Register AU...
For a barcode item, scan the barcode. 4. Press X/TIME key. X/TIME 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH 100• Program Mode Programming ER-390M Electronic Cash Register AU...
4. Enter the number of the Mix & Match Table (1-20); press the X/TIME key. X/TIME 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •101 ER-390M Electronic Cash Register AU...
6. Press the CASH key to end system option programming. System Option Flowchart Repeat for each System Option SBT L X/T IME SBTL CASH Option # Status Default values have been highlighted in bold print 102• Program Mode Programming ER-390M Electronic Cash Register AU...
Cash drawer will open when reports are run? No = 2 Yes = 0 Open drawer during training mode ? No = 4 Decimal place: (0,1,2,3) MMDDYY = Date format is: DDMMYY = YYMMDD = Program Mode Programming •103 ER-390M Electronic Cash Register AU...
Page 114
Display add-price of linked item? No = 0 Yes = 0 Allow sale when stock reaches “0” ? No = 2 Yes = 4 Allow Australian rounding on subtotal? No = 0 104• Program Mode Programming ER-390M Electronic Cash Register AU...
Page 115
Yes = 2 Reset GST after service on hard check ? No = 0 Yes = 4 Alpha overlay descriptor? No = 0 Price Embedded Barcode type? (0/1/2/3/4/7) (See note below) Program Mode Programming •105 ER-390M Electronic Cash Register AU...
6. Press the CASH key to end print option programming. Print Option Flowchart Repeat for each Print Option SBT L X/T IME SBTL CASH Option # Status Default values have been highlighted in bold print Program Mode Programming •107 ER-390M Electronic Cash Register AU...
No = 1 Yes = 0 Print Grand total on the X Financial report ? No = 2 Yes = 0 Print Grand total on the Z Financial report ? No = 4 108• Program Mode Programming ER-390M Electronic Cash Register AU...
Page 119
Chooses volume unit when the PLU is gallonage. Liters = Yes = 0 Print preamble message on receipt ? No = 1 Yes = 0 Print postamble message on receipt ? No = 2 Program Mode Programming •109 ER-390M Electronic Cash Register AU...
Page 120
No = 0 Default = Print preamble graphic logo User = Number of Pre-feeding lines (0-5) on receipt Number of Post-feeding lines (0-5) on receipt Receipt = Print Format Journal = 110• Program Mode Programming ER-390M Electronic Cash Register AU...
Page 121
To use three digit alpha character codes you must select ‘No’ in system option #30 (See “System Option Programming). Also see Descriptor Programming Methods for Alpha Overlay and/or Descriptor Code Table. Program Mode Programming •111 ER-390M Electronic Cash Register AU...
Specific programming instructions for each function key. To change descriptors on reports see: “Program 701 - Financial Report Message Programming ” and “Program 710 - Clerk Report Message Programming also. ” 112• Program Mode Programming ER-390M Electronic Cash Register AU...
N6 and you are only selecting a value for N6, just enter the value for N6.) Press the function key you wish to program. FUNCTION 4. To program additional function keys, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •113 ER-390M Electronic Cash Register AU...
4. To program additional function keys, repeat from step 3, or press the CASH key to finalise the program. CASH NOTE: The MACRO (1 - 10) function keys descriptor is programmed with Programmed 711. Please refer to Miscellaneous Programming - Macro Name Programming. 114• Program Mode Programming ER-390M Electronic Cash Register AU...
4. Press the function key on the keyboard you wish to program. FUNCTION 5. To program additional function keys, repeat from step 2, or press the CASH key to finalize the program. CASH Program Mode Programming •115 ER-390M Electronic Cash Register AU...
No = 0 Yes = 4 Validation is compulsory? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 116• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO ” Program Mode Programming •117 ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” 118• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •119 ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” 120• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •121 ER-390M Electronic Cash Register AU...
No = 0 Yes = 4 Print consecutive number? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 122• Program Mode Programming ER-390M Electronic Cash Register AU...
PBAL Key is used as Drive thru recall key? No = 0 Length of Check (0-9) Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •123 ER-390M Electronic Cash Register AU...
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency). Decimal Exchange Rate Position The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency). Decimal Exchange Rate Position 124• Program Mode Programming ER-390M Electronic Cash Register AU...
No = 0 Yes = 2 Validation is compulsory? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •125 ER-390M Electronic Cash Register AU...
VALUE Yes = 1 Key is inactive? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 126• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •127 ER-390M Electronic Cash Register AU...
Yes = 1 Print level description at the KP? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 128• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •129 ER-390M Electronic Cash Register AU...
Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Affect Digit - Program 90 Affect Digit (1-14) of PLU# Repeat for another function key SBT L 1-14 CASH 130• Program Mode Programming ER-390M Electronic Cash Register AU...
FUNCTION SBT L Enter up to 18 descriptor codes CASH To program the ‘#(non add)’ descriptor: Repeat for another function key FUNCTION SBT L Enter up to 18 descriptor codes CASH Program Mode Programming •131 ER-390M Electronic Cash Register AU...
Yes = 1 Required to close check? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 132• Program Mode Programming ER-390M Electronic Cash Register AU...
Skip printing consecutive # on the guest check? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •133 ER-390M Electronic Cash Register AU...
Yes = 4 Taxable by tax 4? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 134• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •135 ER-390M Electronic Cash Register AU...
Allow register scaleable items by weight extension or by Yes = 4 price entry? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 136• Program Mode Programming ER-390M Electronic Cash Register AU...
Enter the port number if you are using a hard check system. (0-2) Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •137 ER-390M Electronic Cash Register AU...
Yes = 4 Print table# at the remote printer? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 138• Program Mode Programming ER-390M Electronic Cash Register AU...
Using tare number five to manually enter a tare weight? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •139 ER-390M Electronic Cash Register AU...
No = 0 Yes = 4 Validation is compulsory? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” 140• Program Mode Programming ER-390M Electronic Cash Register AU...
Add the tip total to the NET and GROSS sales total? No = 0 Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” Program Mode Programming •141 ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” 142• Program Mode Programming ER-390M Electronic Cash Register AU...
Default values have been highlighted in bold print Descriptor - Program 80 - Refer to “Program 80 - Function Key Descriptor” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming •143 ER-390M Electronic Cash Register AU...
Allow % key preset override active in X control lock Yes = 1 No = 0 position only? Yes = 2 Validation is compulsory? No = 0 Default values have been highlighted in bold print 144• Program Mode Programming ER-390M Electronic Cash Register AU...
Page 155
NOTE: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage enter the percentage in a five-digit format, without the decimal (XX.XXX). For example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%, enter 99999. Program Mode Programming •145 ER-390M Electronic Cash Register AU...
• Program 801 - Drawer Assignment & Training Clerk Programming • Program 810 - Clerk Description Programming allows you to set a unique, up to 18 character, descriptor for each clerk 146• Program Mode Programming ER-390M Electronic Cash Register AU...
4. Enter a secret code (up to 6 digits); press the SBTL key. Enter the secret code, SBTL up to 6 digits 5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize the program. CASH Program Mode Programming •147 ER-390M Electronic Cash Register AU...
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize the program. CASH NOTE: When set to ‘0’ for default drawer, will show ‘1’ on the Program Scan - Clerk Scan, ‘1’ will show ‘2’, ‘2’ will show ‘0’. 148• Program Mode Programming ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay; Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH Program Mode Programming •149 ER-390M Electronic Cash Register AU...
• Program 601 - Price Programming • Program 610 - Mix & Match Description Programming allows you to set a unique, up to 18 characters, descriptor for Mix & Match Table. 150• Program Mode Programming ER-390M Electronic Cash Register AU...
4. Enter a price (up to 7 digits); press the SBTL key. SBTL Price/HALO 5. Repeat from step 3 for each table you wish to program. Press the CASH key to finalize the program. CASH Program Mode Programming •151 ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay, Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH 152• Program Mode Programming ER-390M Electronic Cash Register AU...
Print RED on KP? No = 0 Default values have been highlighted in bold print 5. To program additional groups, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming •153 ER-390M Electronic Cash Register AU...
Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. To program additional groups, repeat from step 3, or press the CASH key to finalize the program. CASH 154• Program Mode Programming ER-390M Electronic Cash Register AU...
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to finalize the program. CASH To removing a Macro If you wish to remove a keystroke from a macro, replace the current function with the INACTIVE function. Program Mode Programming •155 ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay, Type up to 32 SBTL descriptor keys Enter up to 32 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH 156• Program Mode Programming ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay, Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH Program Mode Programming •157 ER-390M Electronic Cash Register AU...
Page 168
TRAIN TTL CASH-IN-D BAL FORWARD CHECK-IN-D GUESTS FD/S-IN-D P/BAL CHG1-IN-D CHECKS PAID CHG2-IN-D SERVICE NET SALE CHG3-IN-D MIX&MATCH CREDIT GST CHG4-IN-D ROUND TTL CREDIT TAX2 CHG5-IN-D CASH OUT CREDIT TAX3 CHG6-IN-D 158• Program Mode Programming ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay, Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH Program Mode Programming •159 ER-390M Electronic Cash Register AU...
4. If you are programming using alpha overlay, Type up to 18 SBTL descriptor keys Enter up to 18 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH Program Mode Programming •161 ER-390M Electronic Cash Register AU...
3. Type the new PLU code number you wish to use for this NLU key, and Press the NLU key on the keyboard you wish to program, and Press the NLU key again. Same NLU KEY NLU Code 4. Press CASH to finalize the program CASH 162• Program Mode Programming ER-390M Electronic Cash Register AU...
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key. Enter the cash limit, X/T IME up to 8 digits 4. Press the CASH key to finalize the program. CASH Program Mode Programming •163 ER-390M Electronic Cash Register AU...
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key. Enter the cash limit, X/T IME up to 8 digits 4. Press the CASH key to finalize the program. CASH 164• Program Mode Programming ER-390M Electronic Cash Register AU...
Program 1300 - Date and Time Programming Use this program to set the clock and calendar on your ER-390M. The date changes automatically. After initial setting, time changing will probably be required only for beginning and ending daylight savings time.
Press the SBTL key. SBT L 5. To program additional tare weights, repeat from step 3, or press the CASH key to finalize the program. CASH 166• Program Mode Programming ER-390M Electronic Cash Register AU...
2. To begin the program, enter 1 6 0 0, press the SBTL key. SBT L 3. Enter a machine number (up to 5 digits); press the X/TIME key. X/TIME 4. Press the CASH key to finalize the program. CASH Program Mode Programming •167 ER-390M Electronic Cash Register AU...
Program Scans Since much time and energy has been invested in the planning and programming of your ER-390M, it is advisable to print a hard copy of the final program for future reference. This copy should be kept in a safe place.
Page 179
X/TIME button. When features on more than one function keys are going to be scanned, repeat “4 then X/TIME” followed with next function key. 4. Press the CASH key to finalize the program. CASH Program Mode Programming •169 ER-390M Electronic Cash Register AU...
XMPT2 SALES $1.50 XMPT3 SALES $7.95 Total exempted XMPT4 SALES $7.50 sales for each tax EATIN TTL $10.12 Total sales for each TAKEOUT TTL type of destination $40.77 continued . . . Sample Reports •171 ER-390M Electronic Cash Register AU...
Page 182
CASH and CHECK SALES CHECK sales $23.05 R/A 1 $145.00 Total and count for R/A 2 each type R/A $0.00 (received on account) and P/O continued . . . (paid out) key. 172• Sample Reports ER-390M Electronic Cash Register AU...
Page 183
CHG6-IN-D $13.09 CHG7-IN-D $0.00 CHG8-IN-D $0.00 CHG1 SALES Total and count for each CHARGE key. $0.00 CHG2 SALES $8.43 CHG3 SALES $8.52 CHG4 SALES -1.60 CHG5 SALES $2.67 continued . . . Sample Reports •173 ER-390M Electronic Cash Register AU...
Page 184
Total and count of items serviced GRAND $375.63 ETHAN 000209 00000 Total and count of mix & match disc. Average number if items per customer, and average dollar sales per customer Grand total 174• Sample Reports ER-390M Electronic Cash Register AU...
Net sales in this SALES RATE 65.39% period. 14:00-14:59 Percentage of total sales SALES AMT $97.33 SALES RATE 34.61% TOTAL CNT TOTAL AMT $281.18 ETHAN 00236 00000 Net sales in all periods. Sample Reports •175 ER-390M Electronic Cash Register AU...
CNT 10 -20.00 SALES RATE -7.44% PLU#33 CNT 15.55 $24.72 SALES RATE 9.20% Total activity for all PLUs TOTAL CNT 189.56 TOTAL AMT $268.60 ETHAN 000213 00000 Total sales for all PLUs. 176• Sample Reports ER-390M Electronic Cash Register AU...
TIME 15:36 REPORT 00001 -------------------------------- Clerk Name INDIVIDUAL CLERK ETHAN Number of NET SALE Transactions $155.23 DRWR TTL $109.81 Net sales for this clerk -------------------------------- ETHAN 000218 00000 Drawer total for this clerk 178• Sample Reports ER-390M Electronic Cash Register AU...
$30.47 GROUP : 8 MDSE 58.40 SALES AMT $44.11 GROUP : 9 STORE MDSE 77.56 SALES AMT $74.58 TOTAL CNT 189.56 TOTAL AMT $268.60 ETHAN 000237 00000 Net sales for all groups. Sample Reports •179 ER-390M Electronic Cash Register AU...
Stock DATE 15/01/2003 WED TIME 15:47 REPORT 00001 PLU number or -------------------------------- PLU descriptor ALL PLU STOCK HAMBURGER Current Stock count DBL BURGER ROAST 25.96 UNLEADED 1488.47 PLU33 161.25 ETHAN 000228 00000 180• Sample Reports ER-390M Electronic Cash Register AU...