Group Programming - Sam4s NR-500 Series Operating And Programming Manual

Group Programming

Up to 99 groups (the exact number is determined by memory allocation) are available
to summarize PLU sales. Group totals appear on reports, so that you can track sales of
different types of items.
To Program Groups
SAM4S NR-500 Series Manual
The group descriptors programmed here will replace the default
•
descriptors GROUP 1 through GROUP 99 that appear on reports.
Each PLU can report totals to one, two or three different groups. If a
•
PLU sends totals to more than one group, the group total that appears on
the Group report will not represent PLU sales. Therefore, you also have
the option of deciding whether each group's total will add to the group
total on the Group report.
1. At the PROGRAM MODE, press 2 and CASH for GROUP. The GROUP
PROGRAMMING screen displays: (The maximum group number is set by
memory allocation.)
GR OU P
EN TER G RO UP #
(1 -10 )
2. Enter the number of the group to be programmed, press the CASH. The
GROUP# PROGRAMMING screen displays:
GR OU P
1. DES C :
2. ADD T O GR OU P T OT AL [ Y]
3. SEN D TO K P
4. KP PO RT #: R CPT
5. KP PO RT #: 1
6. KP PO RT #: 2
GR OU P
7. PRI NT R E ON KP
3. Press the ↑ ↑ ↑ ↑ key and the
confirm. You can also select menu by page
Group option you wish to program.
4. Press the ↑ ↑ ↑ ↑ key for YES and the
Press CLEAR to return to the GROUP PROGRAMMING screen. Continue
to program groups as necessary. Press CLEAR to return to the PROGRAM
MODE screen.
0
[G RO UP 0 1]
[ N]
[ N]
[ N]
[ N]
[ N]
↓ ↓ ↓ ↓ key to select menu and press the CASH key to
↑ ↑ ↑ ↑
↓ ↓ ↓ ↓ key for NO.
↓ ↓ ↓ ↓
key and page key. Select the
Program Mode Programming • 127