Sam4s NR-510B Operating And Programming Manual
  1. Manuals
  2. Brands
  3. Sam4s Manuals
  4. Cash Register
  5. NR-510B
  6. Operating and programming manual

Sam4s NR-510B Operating And Programming Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SAM4S NR-500 Series Electronic Cash Register
Operating and
Programming Manual
All specifications are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NR-510B and is the answer not in the manual?

Questions and answers

Related Manuals for Sam4s NR-510B

Summary of Contents for Sam4s NR-510B

  • Page 1 SAM4S NR-500 Series Electronic Cash Register Operating and Programming Manual All specifications are subject to change without notice.
  • Page 2 ATTENTION The product that you have purchased contains a rechargeable Lithium battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials for details concerning recycling options or proper disposal WARNING This is a Class A product.
  • Page 3 Precaution Statements Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. Safety Precautions 1. Be sure that all built-in protective devices are 7. Product Safety Notice: replaced. Restore any missing protective shields. Some electrical and mechanical parts have special 2.
  • Page 4 Servicing Precautions WARNING: First read the-Safety Precautions-section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. WARNING: An electrolytic capacitor installed with the wrong polarity might explode. 1. Servicing precautions are printed on the cabinet. 5.

  • Page 5: Table Of Contents

    Preset Price Code Entry PLU ..................38 Code Entry PLU Multiplication ................. 38 Code Entry PLU Multiplication with Decimal Point ..........38 Split Pricing Code Entry PLU ................... 39 PLU Price Inquiry ...................... 39 Modifier Key ......................40 SAM4S NR-500 Series Manual Contents • 5...
  • Page 6 Quick Entry Method ....................71 Full Entry Method ...................... 71 Not Found PLU List ....................72 Manager Mode (X Mode) Introduction ..........................73 Overview ..........................73 Manager Mode/Report Mode ....................74 X Reports ..........................75 6 • Contents SAM4S NR-500 Series Manual...
  • Page 7 Saving Reports to an USB memory................. 110 Load/Save Receipt Images ..................111 Program Mode Programming Introduction..........................113 Descriptor Programming Methods ..................114 Descriptor Overlay Method ..................114 Descriptor Code Method ..................116 Program Mode Menu ......................118 SAM4S NR-500 Series Manual Contents • 7...
  • Page 8 BARCODE options ....................161 EJ options ........................ 161 TRAIN MODE options.................... 162 TABLE options ....................... 163 DETAIL PRINT options ..................163 Employee Programming ......................164 Clerk Programming - Reference Information ............164 Time ............................165 8 • Contents SAM4S NR-500 Series Manual...
  • Page 9 Time ............................177 PLU ............................178 Clerk ............................179 Individual Clerk ........................180 Groups ........................... 180 Day ............................181 Stock ............................181 Check File ..........................182 Drawer Totals ........................182 Balancing Formulas ....................... 183 Glossary SAM4S NR-500 Series Manual Contents • 9...

  • Page 11: Introduction

    Two Printer Stations (Receipt Printer) (Receipt and Journal Printers) Flat Keyboard (90 Keys) NR-510 Receipt Printer Flat Keyboard Raised Keyboard (48 Keys) NR-510R NR-520R Receipt Printer Receipt and Journal Printers Raised Keyboard Raised Keyboard SAM4S NR-500 Series Manual Contents • 11...

  • Page 12: Using This Manual

    Using This Manual This manual provides you with a means to use your SAM4S cash register to its fullest potential. It is divided into seven sections: 1. "Getting Started" on page 23 provides quick start steps to help you get up and running for basic applications.

  • Page 13: Identifying Components & Connections

    Only NR-520R Customer Rear Display Receipt printer Operator Display NR-500 Series: Multi-Line Keyboard - Flat keyboard : Control Lock NR-510 - Raised keyboard : NR-500R Series Power On/Off Connections (Serial, RJ45, USB, Ethernet) Drawer SAM4S NR-500 Series Manual Introduction • 13...
  • Page 14 The USB (Device and Host) port can be connected to PC, scanner or memory. • If you want to know more details, See page on 108 for USB specification. The Ethernet port(LAN) is option. • 14 • Introduction SAM4S NR-500 Series Manual...
  • Page 15 Management X and Z reports • Electronic Journal capability • 6-line programmable preamble and postamble messages • Programmable descriptors for financial and clerk reports • Up to 100 Mix & Match discounts • SAM4S NR-500 Series Manual Introduction • 15...

  • Page 16: Display

    Note: The “CLOSED” message will display if a clerk is not signed on. R: ON CL ER K 00 K1 0 1 VO ID M ODE CL OS ED R: ON CL ER K 01 K1 0 1 VO ID MO DE 0. 00 16 • Introduction SAM4S NR-500 Series Manual...
  • Page 17 CASH key to ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ confirm. ♦ You can also select menu by page key and page key. ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ SAM4S NR-500 Series Manual Introduction • 17...
  • Page 18 CASH key to ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ confirm. ♦ You can also select menu by page key and page key. ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ 18 • Introduction SAM4S NR-500 Series Manual...

  • Page 19: Printer/Printers

    NR-520R Model features separate receipt and journal printers. Journal printer Receipt printer Printer Specifications Paper 58mm Thermal Paper Paper Loading: Drop-in Loading Paper Diameter: Ø _ max Normal 50mm/s Print Speed: 70mm/s Paper end sensor SAM4S NR-500 Series Manual Introduction • 19...

  • Page 20: Control Lock

    OFF, REG VOID, OFF, REG, X VOID, OFF, REG, X, Z VOID, OFF, REG, X, Z, PGM ALL POSITIONS Note: Keys may be removed from the control lock in the OFF or REG positions. 20 • Introduction SAM4S NR-500 Series Manual...

  • Page 21: Keyboards

    FEED HELP ACCT (PAGE ↓ ↓ ↓ ↓ (PAGE ↑ ↑ ↑ ↑ CLEAR X/TIME #/NS CHARGE VOID ↑ ↑ ↑ ↑ CHEQUE RETURN ↓ ↓ ↓ ↓ ERROR SBTL CORR CASH CANCEL SAM4S NR-500 Series Manual Introduction • 21...

  • Page 22: Initial Clear

    An initial clear may be necessary as part of servicing, or troubleshooting. • Perform this procedure only as necessary. Contact your SAM4S dealer first if you have questions about operating or programming your SAM4S NR-500 Series. To Perform an Initial Clear: 1.

  • Page 23: Getting Started

    Getting Started Quick Start Steps SAM4S ECRs are designed to work out-of-the-box. You can sign on a clerk, enter amounts and finalize a sale. Most functions are active and ready to use. Use the Quick Start Instructions provided here to prepare your NR-500 Series ECR for entering a program.

  • Page 24: Installing The Paper

    3. Ensure that the paper is being fed from the bottom of the roll and then close the paper cover slowly until it locks firmly. 4. Pass the leading edge of the paper through the tear-bar slot. Tear off the excess paper. Replace the printer cover. 24 • Getting Started SAM4S NR-500 Series Manual...

  • Page 25: Clearing Memory

    5. Press the upper left key of the keyboard, then the lower left key, then the upper right key, and finally press the lower right key. <NR-500R Series> CHEQUE ↓ ↓ ↓ ↓ PRICE PRICE <NR-500 Series> CHEQUE ↓ ↓ ↓ ↓ SAM4S NR-500 Series Manual Getting Started • 25...

  • Page 26: Memory Allocation Information

    15000 CHECK# SOFT CHECK LINES CHECK TYPE SOFT(0) / HARD(1) Memory Allocation Information 1. From the SERVICE MODE screen, select ALLOCATION menu and Press CASH if you want to scan memory allocation. 26 • Getting Started SAM4S NR-500 Series Manual...

  • Page 27: Operations

    ♦ Received On Account Operations ♦ Paid Out Operations ♦ Subtotaling a Sale ♦ Eat in / Take Out / Drive Thru Sales ♦ Totaling and Tendering ♦ Check Tracking Operations ♦ Not Found PLU SAM4S NR-500 Series Manual Operations • 27...

  • Page 28: Function Key Descriptions

    CHECK key. The cash drawer will open only if the amount tendered is equal to or greater than the total amount of the sale. Change issued will be subtracted from the cash-in-drawer total. 28 • Operations SAM4S NR-500 Series Manual...
  • Page 29 GUEST Use to enter the count of guests served as part of a guest check. The entry of a guest count can be enforced when opening a guest check, or for all transactions. SAM4S NR-500 Series Manual Operations • 29...
  • Page 30 The amount received adds to the cash-in-drawer total. SERVICE Use to temporarily finalize Previous Balance or check tracking transactions. SUBTOTAL Displays subtotal of sale including tax. Must be pressed prior to a sale discount or sale surcharge. 30 • Operations SAM4S NR-500 Series Manual...
  • Page 31 WASTE key again to finalize. The WASTE key may be under manager control, requiring the mode to be in the MANAGER MODE. The WASTE key is not allowed within a sale. SAM4S NR-500 Series Manual Operations • 31...

  • Page 32: Clerk Operations

    Direct Sign-on CLERK# Clerk # (1-10) Code Entry CLERK# CLERK# Clerk Code (up to 6 digits) Clerk Sign Off Instructions CLERK # 32 • Operations SAM4S NR-500 Series Manual...

  • Page 33: Item Registrations

    PLU5 is programmed with a preset price of 1 .29, and is taxable by Tax 1. • PLU6 is programmed with a single item of ￡ 6 .00. • Tax 1 is programmed at 6%. • SAM4S NR-500 Series Manual Operations • 33...

  • Page 34: Open Keyboard Plu Entry

    GAL AMT @ 3.799 PLU7 ￡ 2 0.00 2. Press a PLU key set to gallonage ￡ TOTAL 2 0.00 CASH function. For example, press PLU 7: ￡ 2 0.00 CLERK 01 000011 00001 34 • Operations SAM4S NR-500 Series Manual...

  • Page 35: Keyboard Plu Repeat Entry

    ￡ 8 .44 Do not use the decimal key. For CASH ￡ 8 .44 ￡ example, for 1 .99, enter: SUNNY 000011 00001 3. Press a PLU key. For example, press PLU 1: SAM4S NR-500 Series Manual Operations • 35...

  • Page 36: Keyboard Plu Multiplication With Decimal Point

    CLERK 01 000011 00001 3. Enter an amount on the ten-key pad. For example, if the items are priced 3 ￡ 1 .00, enter: 4. Press a PLU key. For example, press PLU 1: 36 • Operations SAM4S NR-500 Series Manual...

  • Page 37: Single Item Keyboard Plu

    TOTAL ￡ 3 .17 key pad. Do not use the decimal key. CASH ￡ 3 .17 For example, for ￡ 2 .99, enter: CLERK 01 000011 00001 3. Press the PLU key again. SAM4S NR-500 Series Manual Operations • 37...

  • Page 38: Preset Price Code Entry Plu

    PLU3 T1 ￡ 1 1.21 TAX1 ￡ 0 .67 2. Enter the PLU number; press the PLU TOTAL ￡ 1 1.88 key. For example, enter: CASH ￡ 1 1.88 CLERK 01 000011 00001 38 • Operations SAM4S NR-500 Series Manual...

  • Page 39: Split Pricing Code Entry Plu

    If the PLU has prices at more than one price level, all prices will be shown. 4. Press CLEAR to remove the price information from the screen, or enter the PLU again to register the item. SAM4S NR-500 Series Manual Operations • 39...

  • Page 40: Modifier Key

    1 to the fourth PLU # position, resulting in the registration of PLU #1001. 4. Press another PLU key. In this example press PLU 2 with a price of ￡ 1 .50. 40 • Operations SAM4S NR-500 Series Manual...

  • Page 41: Price Level Key

    2 .00 for price level 4. Press another PLU key. In this example press PLU 2 programmed to register PLU #2 with price level 1. Note that the level 1 price is registered. SAM4S NR-500 Series Manual Operations • 41...

  • Page 42: Promo

    2. Enter the item or items that are wasted. PLU2 ￡ 1 .50 ***WASTE*** 3. Press the WASTE key again to total ￡ TOTAL 2 .75 the wasted items: CLERK 01 000011 00001 WASTE 42 • Operations SAM4S NR-500 Series Manual...

  • Page 43: Shifting Or Exempting Tax

    000011 00001 ￡ example, for 2 .99, enter: 3. Press a PLU key. For example, press PLU 1. If PLU 1 is normally taxable by tax 1, the registration will be non- taxable. SAM4S NR-500 Series Manual Operations • 43...

  • Page 44: Exempting Tax

    TAX SHIFT 1, then press SUBTOTAL: TAX 1 SHIFT TOTAL 5. The display reflects the transaction without added taxes. Total the sale with CASH, CHEQUE , or a CHARGE function. The sale will not include tax 1. 44 • Operations SAM4S NR-500 Series Manual...
  • Page 45 TAX EXMT function from a function look up menu key): EXMT 5. The display reflects the transaction without added taxes. Total the sale with CASH, CHEQUE, or a CHARGE function. The sale will not include tax1. SAM4S NR-500 Series Manual Operations • 45...

  • Page 46: Percent Key Operations

    PLU2 ￡ 1 0.00 -33.333% AMOUNT -3.33 ￡ TOTAL 6 .67 CASH ￡ 6 .67 3. Press the %1 key: CLERK 01 000011 00001 4. The discount is automatically subtracted. 46 • Operations SAM4S NR-500 Series Manual...

  • Page 47: Percent On Sale Total

    1 0.00 -2.00 3. Enter the amount of the coupon, press ￡ TOTAL 8 .00 the appropriate % key. For example: CASH ￡ 8 .00 CLERK 01 000011 00001 4. The coupon is subtracted. SAM4S NR-500 Series Manual Operations • 47...

  • Page 48: Coupon On Item (Store Coupon)

    PLU key where PLU2 T1 -2.99 TAX1 AMT -0.18 it was registered originally. TOTAL -3.17 CASH -3.17 CLERK 01 000011 00001 3. Total the sale with CASH, CHEQUE, or a CHARGE function. 48 • Operations SAM4S NR-500 Series Manual...

  • Page 49: Voids And Corrections

    3. Enter the price of the first item; then ￡ TAX1 AMT 0 .14 press the PLU key where it was TOTAL ￡ 2 .43 registered originally. CASH ￡ 2 .43 CLERK 01 000011 00001 SAM4S NR-500 Series Manual Operations • 49...

  • Page 50: Cancel

    PLU1 T1 -2.29 function. PLU2 -1.00 TAX1 AMT -0.14 3. All totals and counters are corrected as TOTAL -3.43 if the original transaction did not take CASH -3.43 place. CLERK 01 000011 00001 50 • Operations SAM4S NR-500 Series Manual...

  • Page 51: No Sale Operations

    08:33 ￡ PLU1 T1 2 .99 1234 NON-ADD# TAX1 AMT ￡ 0 .18 3. Press #/NS: TOTAL ￡ 3 .17 CHEQUE ￡ 3 .17 #/NS CLERK 01 000011 00001 4. Press CHEQUE: CHEQUE SAM4S NR-500 Series Manual Operations • 51...

  • Page 52: Received On Account Operations

    3. Enter the check amount received, press CHEQUE. CHEQUE 4. Enter the charge amount received, press CHARGE. CHARGE 5. You can continue to itemize receipts, or you can finalize by pressing or selecting the same received on account key. 52 • Operations SAM4S NR-500 Series Manual...

  • Page 53: Paid Out Operations

    2. Press SUBTOTAL. The subtotal will display with the message "SUBTOTAL" indicated on the rear display. TOTAL The subtotal can be printed if the print option is set. See “PRINT” of "Options Programming" in the "Program Mode Programming" chapter. SAM4S NR-500 Series Manual Operations • 53...

  • Page 54: Analysis

    2. To total a cash sale, press CHEQUE: 07/21/2014 MON 08:33 CHEQUE PLU2 ￡ 7 .96 TOTAL ￡ 7 .96 3. The display will indicate the total CHEQUE ￡ 7 .96 amount of the cash sale. CLERK 01 000011 00001 54 • Operations SAM4S NR-500 Series Manual...

  • Page 55: Tendering A Cash Sale

    CHEQUE ￡ 2 0.00 ￡ ￡ ￡ ￡ CHANGE 5 .70 CLERK 01 000011 00001 4. The display will indicate the total amount of the check tendered and the change due, if any. SAM4S NR-500 Series Manual Operations • 55...

  • Page 56: Totaling A Charge Sale

    PLU1 T1 2 .99 ￡ 1 .99 PLU2 ￡ 7 .96 ￡ TAX1 0 .36 ￡ TOTAL 1 4.30 CHARGE ￡ 2 0.00 ￡ ￡ ￡ ￡ CHANGE 5 .70 CLERK 01 000011 00001 56 • Operations SAM4S NR-500 Series Manual...

  • Page 57: Split Tender

    3. Enter the amount of check tendered by the customer. For example, enter ￡ 1 0.00 and press CHEQUE: CHEQUE 4. When the total tendered equals or exceeds the total due, the receipt will print and the transaction is complete. SAM4S NR-500 Series Manual Operations • 57...

  • Page 58: Post Tender

    If the receipt is off, you can still issue a receipt after the sale has been completed. Printing a Receipt after the Sale After the sale has been totaled, but before the next transaction is started, press CASH: CASH 58 • Operations SAM4S NR-500 Series Manual...

  • Page 59: Currency Conversion

    "OPTIONS - PRINT" in the "Program Mode Programming" 5. The display will indicate the amount chapter. of foreign currency tendered and display ￡ 5 .17 change due. The change due is computed in home currency! SAM4S NR-500 Series Manual Operations • 59...

  • Page 60: Check Tracking Operations

    Consolidation of like items can be selected for guest check printing. For • example, if three rounds of drinks are served, the check will print "3 TAP BEER" rather than "1 TAP BEER" three times. 60 • Operations SAM4S NR-500 Series Manual...
  • Page 61 See "Function Key Assignment" in the "Service Mode Programming" chapter to place the functions necessary for your application. See "Function Key Programming" in the "Program Mode Programming" chapter to set the options for each function. SAM4S NR-500 Series Manual Operations • 61...

  • Page 62: Posting Balances Manually

    ￡ ￡ ￡ ￡ 3 .00 BFWD 3. To total the posting, press SERVICE: CLERK 01 000011 00001 SERVICE 4. Place a slip in an optional slip printer, press the PRINT CHECK key. 62 • Operations SAM4S NR-500 Series Manual...
  • Page 63 CHECK, or one of the CHARGE functions. If the tender is greater than the balance due, change is displayed: CASH 4. Place a slip in an optional slip printer, press the PRINT CHECK key. SAM4S NR-500 Series Manual Operations • 63...

  • Page 64: Soft Check

    SERVICE Note: If a table number entry is required for all guest checks, and checks are assigned by register, the check will be assigned by the register when the table # is entered. 64 • Operations SAM4S NR-500 Series Manual...
  • Page 65 CHK # : 1 so, the PRINT CHECK key will CLERK 01 000011 00001 automatically service the check: PRINT CHECK The number of times each check has been printed is counted and printed on the check SAM4S NR-500 Series Manual Operations • 65...
  • Page 66 3. Pay the balance as you would normally tender a transaction, with CASH, CHECK, or one of the CHARGE functions. If the tender is greater than the balance due, change is displayed. CASH 66 • Operations SAM4S NR-500 Series Manual...

  • Page 67: Hard Check

    GUEST key: GUEST 4. Register the items you wish to sell. 5. Place a slip in an optional slip printer, the check will print automatically when you press SERVICE: SERVICE SAM4S NR-500 Series Manual Operations • 67...
  • Page 68 CASH ￡ 2 5.00 CHECK, or one of the CHARGE ￡ CHANGE 3 .00 functions. If the tender is greater than No.000013 CLERK 01 TIME 11:15 the balance due, change is displayed. CASH 68 • Operations SAM4S NR-500 Series Manual...

  • Page 69: Fast Food Drive Thru

    3 .00 CHECK, or one of the CHARGE CASH ￡ 5 .00 functions. If the tender is greater than CHANGE ￡ 2 .00 the balance due, change is displayed. CLERK 01 000011 00001 CASH SAM4S NR-500 Series Manual Operations • 69...

  • Page 70: Clerk Interrupt Operation

    CLERK#, or press the CLERK 1,2, 3 and etc keys. CLERK# Repeat as above until all items have been sold. 5. To accept payment press CASH, CHEQUE or any other payment function. CASH 70 • Operations SAM4S NR-500 Series Manual...

  • Page 71: Not Found Plu

    PLU file, the NOT FOUND PLU screen will display: NO T FO UN D PLU EN TER C AS H KE Y TO CR EA TE P LU SAM4S NR-500 Series Manual Operations • 71...

  • Page 72: Not Found Plu List

    To run a NOT FOUND PLU list, choose X REPORTS NOT FOUND • PLU (selection #3) from the PLU REPORT menu To run a Reset Not Found PLUs, choose NOT FOUND PLU (selection #3) from the • Z MODE menu. 72 • Operations SAM4S NR-500 Series Manual...

  • Page 73: Manager Mode (X Mode)

    ♦ Manager Mode / Report Mode ♦ X Reports ♦ Save Report to SD Card ♦ Declaration ♦ Set Training Mode ♦ Program Stock Entry ♦ Receipt On or Off SAM4S NR-500 Series Manual Manager Mode (X Mode) • 73...

  • Page 74: Manager Mode/Report Mode

    3. FL ASH R EP OR T 4. SE T T RA IN M ODE 5. ST OCK E NT RY 6. SA VE RP T SD -P AG E 1/ 2- 74 • Manager Mode (X Mode) SAM4S NR-500 Series Manual...

  • Page 75: Reports

    5. Select the REPORT LEVEL (DAILY or PERIOD). After the selection, the report will start. FI NA NC IA L 1. DAI LY (X 1) 2. PER IO D( X2 ) SAM4S NR-500 Series Manual Manager Mode (X Mode) • 75...

  • Page 76: Electronic Journal Operation

    13 .VO ID M OD E 14 .TR AI NI NG 15 .BY C LE RK 16 .BY D AT E 17 .BY R CP T NO . 18 .BY L IN E 76 • Manager Mode (X Mode) SAM4S NR-500 Series Manual...

  • Page 77: Declaration

    CASH. The result is added to the cash declared running total on the screen. 3. When you have completed declaration entries, press the CASH key again to finalize and total your declaration. SAM4S NR-500 Series Manual Manager Mode (X Mode) • 77...

  • Page 78: Flash Report

    SE T TRA IN M OD E ST ART :1 / E ND :0 3. The START TRAIN screen displays. To start training mode, type your password and press CASH. 78 • Manager Mode (X Mode) SAM4S NR-500 Series Manual...

  • Page 79: Stock Entry

    EN TER F RO M PL U # 7. Enter FROM PLU# number to display TO PLU# screen: ST OC K EN TR Y EN TER F RO M PL U# EN TER T O PL U# SAM4S NR-500 Series Manual Manager Mode (X Mode) • 79...
  • Page 80 For example, type 1 0 0 0 to enter ten units of inventory. 10. To program a additional PLUs repeat step 5 or 6, or press CLEAR key to finalize. 80 • Manager Mode (X Mode) SAM4S NR-500 Series Manual...

  • Page 81: Save Report Sd

    3. The RCPT ON/OFF screen displays. Press the 0 to print or the 1 to not print. Note: When the receipt is off, a receipt may be printed after the sale by pressing CASH after the transaction is complete. SAM4S NR-500 Series Manual Manager Mode (X Mode) • 81...

  • Page 83: Z Mode

    1. Move to the Z MODE to display the Z MODE menu: Z M OD E 1. Z REP OR T 2. RE SET E .J . 3. NOT F OU ND P LU - PA GE 1 /1- SAM4S NR-500 Series Manual Z Mode • 83...

  • Page 84: Z Reports

    4. TRA IN F IN AN CIA L 4. Select the REPORT LEVEL (DAILY or PERIOD). After the selection, the report will start. FI NA NC IAL 1. DAI LY (Z 1) 2. PER IO D( Z2 ) 84 • Z Mode SAM4S NR-500 Series Manual...

  • Page 85: Reset Electronic Journal

    AR E Y OU S UR E? Y =C ASH N =C LE AR 2. The screen asks: ARE YOU SURE ? Press the CASH key for YES or CLEAR key for NO to clear the report. SAM4S NR-500 Series Manual Z Mode • 85...

  • Page 87: Service Mode Programming

    The following procedures are done from the Service Mode menu: Self Tests • Memory clear • Allocation • Assignment of functions to keyboard locations • Memory allocation • ECR Setup • Program backup • Help menu • SAM4S NR-500 Series Manual Service Mode Programming • 87...

  • Page 88: Service Mode

    ↓ ↓ ↓ ↓ key. SE RV IC E MO DE 7. PR OGR AM B AC KUP 8. HE LP ME NU - PA GE 2 /2- 88 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 89: Self Test

    Y =C ASH N =C LE AR 4. Press the CASH for YES or the CLEAR for NO. 5. The message "ALL TOTAL CLEAR" is printed and the screen returns to the SERVICE MODE menu. SAM4S NR-500 Series Manual Service Mode Programming • 89...

  • Page 90: Clear Totals

    Train Grand Total. ED IT CO UN TE RS Z COU NT ER RE CEI PT # GR AND T OT AL 10 0. 00 TR AIN G RA ND 0. 00 90 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 91: Function Key Assignment

    2. If you wish to program the CASH key, select it immediately after selecting KEY ASSIGNMENT from the SERVICE MODE menu. After the initial key is programmed, the CASH key is used to finalize the program. SAM4S NR-500 Series Manual Service Mode Programming • 91...

  • Page 92: Function Key Codes

    CONV. 4 AUTO CASH 2 PAYMENT ERR CORRECT AUTO CASH 3 PAY TENDER PLU # AUTO CASH 4 INACTIVE PRICE LEVEL 1 AUTO CASH 5 PRICE LEVEL 2 AUTO CASH 6 92 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 93: Define Port (Serial, Usb)

    9. KP EN D LI NE [ 7] 10 .S LIP S TA RT LI NE [ 0] 4. Press the CLEAR key to finalize and return to the DEFINE PORT screen. SAM4S NR-500 Series Manual Service Mode Programming • 93...

  • Page 94: Usb Setting

    USB Specifications USB TYPE USB VERSION SPEED PC-COM For connecting PC USB 2.0 SCANNER For using scanner FULL SPEED (only HID type) MEMORY For backup & restore USB 2.0 FULL SPEED 94 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 95: Ecr Setup

    ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ 3. During check Operator Display press the key and the key to change constrast. Press CASH to confirm and return to the ECR SETUP menu. SAM4S NR-500 Series Manual Service Mode Programming • 95...

  • Page 96: Version Information

    3. LCD C ON TR AS T 2. To print Version Information, press 1 and CASH key for ROM INFO. 3. The version information is printed and press CLEAR key to returns to the SERVICE MODE menu. 96 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 97: Sd Card Operation

    “-“ or “/” that cannot be used in naming a folder on your PC. If you use such a character in your store name, you will not be able to read the files on your PC. The Store Name field is 8-characters in length. SAM4S NR-500 Series Manual Service Mode Programming • 97...
  • Page 98 Select the SD card drive, right click and select Format. (Win XP screen shown; slightly different procedures are used with different operating systems.) Select “Format…” 3. From the Format dialog you must select the File System: FAT32. 98 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 99: Program Backup And Load

    The NR-500 Series will write the program files to the folder: • NR-500/STORENAME/PGMBACK In the example below, the store name is “SAM4S”. • 6. After a short pause, the register will display confirmation of the successful backup with the message “SUCCESS!” Below is an Explorer view of the backed up files.

  • Page 100: Saving Reports To An Sd Card

    “CLK02332” represents a Clerk report taken at 23:32 (in a 24-hour time format.) In this manner, multiple reports backed up at different times in the same day will collect in the same “date” folder. 100 • Service Mode Programming SAM4S NR-500 Series Manual...
  • Page 101 5. Select type CSV format (for Excel) or REP format (for PC Utility) 6. The register will display confirmation of the successful restoration with the message “SUCCESS!” If the save is unsuccessful, the register will print an error message. SAM4S NR-500 Series Manual Service Mode Programming • 101...

  • Page 102: Load/Save Receipt Images

    Enter 384 in the Width field; enter 192 in the Height field; select Pixels as the unit. Click OK to exit the dialog box. e. Your image will be cropped to the 384 x 192 pixel size. If you cropped part 102 • Service Mode Programming SAM4S NR-500 Series Manual...
  • Page 103 8. When the image is selected, click OK. Verify that the message “Save As UserPre.Img” or “Save As UserPost.Img” displays. If the file is too large, and cannot be loaded, the message “File Size Error” displays. SAM4S NR-500 Series Manual Service Mode Programming • 103...
  • Page 104 3. From the Service Mode menu, select “7.PROGRAM BACKUP”. 4. From the PROGRAM BACKUP menu select “1.SD”. 5. From the SD menu select “5.IMAGE LOAD”. 6. The message “SUCCESS!” will display on the LCD. 104 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 105: Flash Rom Updates

    The NR-500 Series register software is loaded in flash ROM. This program may occasionally be updated by the manufacturer. Your SAM4S dealer can update the software if necessary. The Flash ROM can be loaded through a PC or by SD card.
  • Page 106 8. Select Boot Area Only in the Select One option buttons. 9. Press OK Button. The download takes about 30 seconds; the scroll bar 106 • Service Mode Programming SAM4S NR-500 Series Manual...
  • Page 107 Turn the power switch to OFF, the program update is complete. 12. Disconnect the PC cable. 13. Perform a memory all clear on the ECR. The ECR is now ready to program or to load a previously saved end-user program. SAM4S NR-500 Series Manual Service Mode Programming • 107...

  • Page 108: Usb Operation

    NOTE: USB memory must be formatted as FAT 32. CAUTION: Formatting the USB memory will clear all data on the USB memory and prepare it for use. See page on 98 for detail. 108 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 109: Program Backup And Load

    The NR-500 Series will write the program files to the folder: • NR-500/STORENAME/PGMBACK In the example below, the store name is “SAM4S”. • 6. After a short pause, the register will display confirmation of the successful backup. Below is an Explorer view of the backed up files.

  • Page 110: Saving Reports To An Usb Memory

    “CLK02332” represents a Clerk report taken at 23:32 (in a 24-hour time format.) In this manner, multiple reports backed up at different times in the same day will collect in the same “date” folder. 110 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 111: Load/Save Receipt Images

    Print postamble image)” of the “Options Programming” in the “Program Mode Programming” to activate the image printing. Preparing a Graphic Logo Bitmap for an NR-500 Series See page on 102 for detail. SAM4S NR-500 Series Manual Service Mode Programming • 111...
  • Page 112 2. Move to the SERVICE MODE. 3. From the Service Mode menu, select “7.PROGRAM BACKUP”. 4. From the PROGRAM BACKUP menu select “2.USB”. 5. From the USB menu select “5.IMAGE LOAD”. 112 • Service Mode Programming SAM4S NR-500 Series Manual...

  • Page 113: Program Mode Programming

    Mode. It is possible to set all options in Program Mode and you could see all setting values by printing it out. SAM4S NR-500 Series Manual Program Mode Programming • 113...

  • Page 114: Descriptor Programming Methods

    NOTE: Use the CAPSkey to toggle between upper and lower case descriptor options. To program the descriptor “APPLE” with DOUBLE (wide) characters type: DOUBLE NOTE: Use the DOUBLEy to toggle to between double and normal size descriptor options. 114 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 115 G & BACK ENTER ￡ ￡ ￡ ￡ PRICE PRICE Flat Keyboard Overlay € ￡ ￡ ￡ ￡ ■ ■ ■ ■ EXIT & BACK ENTER < > CAPS DOUBLE SPACE SPACE SAM4S NR-500 Series Manual Program Mode Programming • 115...

  • Page 116: Descriptor Code Method

    Program Example To program the descriptor "APPLE", type: [065] [080] [080] [076] [069] [CASH] For DOUBLE (wide) characters enter 999 after the descriptor code. For example: A = [999] [065] [CASH] 116 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 117 & SPACE ￡ ￡ ￡ ￡ Char. Code Char. Code < Char. Code > Char. Code Char. Code Char. Code Char. Code Char. Code Char. Code BACK SPACE DOUBLE Char. Code SAM4S NR-500 Series Manual Program Mode Programming • 117...

  • Page 118: Program Mode Menu

    P RO GR AM MO DE 7. TA XES ← 8. ME SSA GE S 9. MI X & M AT CH 10 .PG M SC AN -P AG E 2/ 2- 118 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 119: Plu Programming

    5. From the ADD/CHANGE screen, Press 2 and CASH to select RANGE PLU. The PLU NUMBER screen displays: A DD /C HA NGE EN TER F RO M PL U # 6. Enter FROM PLU number and CASH to display TO PLU# screen: SAM4S NR-500 Series Manual Program Mode Programming • 119...

  • Page 120: Plu Options - Reference Information

    TAXable BY TAX1 Y or N Select N for non taxable items. Select Y to apply the appropriate tax automatically for this PLU. TAXable BY TAX2 TAXable BY TAX3 TAXable BY TAX4 120 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 121 Z PLU report. PRESET Y or N If preset override is Y, then you can force manager control OVERRIDE IN for preset override by setting this option to Y. MGR CONTROL SAM4S NR-500 Series Manual Program Mode Programming • 121...
  • Page 122 PLU, enter the PLU # you wish to link with the 10-key pad. Enter 0 for no link. QTY/MODIFIER1 0-99.99 Enter quantity modifier count. MINIMUM STOCK 0-9999.99 Enter Minimum Stock amount. 122 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 123: Delete Plu

    2. Press 2 and CASH to delete a range of PLUs. The PLU NUMBER screen displays: Enter the number of FROM PLU# in the range you wish to delete. Press CASH. DE LE TE EN TER F RO M PL U# SAM4S NR-500 Series Manual Program Mode Programming • 123...
  • Page 124 EN TER T O PL U # 4. Press CASH to delete the PLU. The DELETE message will print. 5. Continue to delete another PLUS or press CLEAR key until return to PROGRAM MODE menu. 124 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 125: Plu Stock

    EN TER T O PL U# 6. Enter TO PLU# number and CASH to display STOCK ENTRY screen: S TO CK E NTR Y OP ERA TO R: A DD (+) A DD (+ ) SAM4S NR-500 Series Manual Program Mode Programming • 125...

  • Page 126: Nlu Code# Program

    3. The current PLU code number displays. Type the new PLU code number you wish to use for this NLU key, press CASH. 4. The NLU CODE PROGRAM screen returns. Continue from step 1 to program additional NLU keys, or press CLEAR to exit. 126 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 127: Group Programming

    ↓ ↓ ↓ ↓ key for NO. Press CLEAR to return to the GROUP PROGRAMMING screen. Continue to program groups as necessary. Press CLEAR to return to the PROGRAM MODE screen. SAM4S NR-500 Series Manual Program Mode Programming • 127...
  • Page 128 Select Y if you wish items reporting to this group to print in red on the kitchen printer. (Note, the kitchen printer must have red/black printing capability, and this option does not apply to the register receipt printer.) 128 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 129: Function Key Programming

    NO. Press the CASH to confirm the option value and view the next menu. 7. Press CLEAR at anytime to return to the FUNCTION KEY menu without saving changes. SAM4S NR-500 Series Manual Program Mode Programming • 129...
  • Page 130 MAX DIGIT flag MAX DIGIT below. MAX DIGIT (0-8) Enter the maximum number of digits for non-add number entry. Zero (0) means no limit. 130 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 131 % entry. ALLOW ONLY ONE Y or N If Y, you can enter only a single coupon and you must TIME SUBTOTAL press the SUBTOTAL key before the coupon entry. ENTRY SAM4S NR-500 Series Manual Program Mode Programming • 131...

  • Page 132: Add Check

    EXEMPT TAX 2 EXEMPT TAX 3 EXEMPT TAX 4 COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. 132 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 133: Cancel

    Select Y to exempt the appropriate tax automatically when finalized with this key. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. SAM4S NR-500 Series Manual Program Mode Programming • 133...

  • Page 134: Charge 1-8

    Select Y to exempt the appropriate tax automatically when – TAX4 finalized with this key. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. 134 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 135: Cheque

    RS- ENDORSEMENT 232C port. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. SAM4S NR-500 Series Manual Program Mode Programming • 135...

  • Page 136: Check

    SCAN CHECK # Y or N Choose Y to allow the check number to be inputted by a scanner (must be nine digits or less). 136 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 137: Currency Conversion 1-4

    0 - 4 Enter a number from 0 to 4 to indicate the decimal position DEC. of the exchange rate. Count the decimal position from the right. See the examples below. SAM4S NR-500 Series Manual Program Mode Programming • 137...

  • Page 138: Analysis1-3

    REGISTER MODE. When selected, the function is allowed only in the MANAGER MODE. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. 138 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 139: Guest

    UNDER MGR Y or N Select Y if you do not want the operator use this function in CONTROL REGISTER MODE. When selected, the function is allowed only in the MANAGER MODE. SAM4S NR-500 Series Manual Program Mode Programming • 139...

  • Page 140: Return

    For example, if you wish to affect PLU digit #4 DIGIT (0-9) with a value of 1, then pressing this modifier key prior to the registration of PLU #17 will result in the registration of PLU #1017. 140 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 141: Pbal

    REGISTER MODE. When selected, the function is allowed only in the MANAGER MODE. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. SAM4S NR-500 Series Manual Program Mode Programming • 141...

  • Page 142: Print Check

    If an item is taxable and you wish to remove taxes and a TAX1 cost of the item when using the PROMO key, set the TAXABLE BY taxable status for the appropriate tax to Y. TAX2 TAXABLE BY TAX3 TAXABLE BY TAX4 142 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 143: Recd On Acct 1-3

    RS-232C port. HARD CHECK If you are using a hard check system, enter the RS232C port PRINTER PORT number (1 or 2) where the optional guest check printer is (0-2) attached. SAM4S NR-500 Series Manual Program Mode Programming • 143...

  • Page 144: Table

    (i.e. a tax exempt #) before the key is used. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. 144 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 145: Tip

    REGISTER MODE. When selected, the function is allowed only in the MANAGER MODE. COMPULSORY Y or N Choose Y to enforce validation if an optional printer with VALIDATION validation capability is connected to an RS-232C port. SAM4S NR-500 Series Manual Program Mode Programming • 145...

  • Page 146: Waste

    RECEIPT PRINT ON Y or N Select Y to print text on Guest Check. GUEST CHECKS PRINT DOUBLE Y or N Select Y to print text with double size font. SIZE 146 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 147: Auto Cash1-8

    UNDER MGR Y or N Select Y if you do not want the operator use this function in CONTROL REGISTER MODE. When selected, the function is allowed only in the MANAGER MODE. SAM4S NR-500 Series Manual Program Mode Programming • 147...

  • Page 148: Macro Key Programming

    C AS H 6. Press the same MACRO key to end the sequence. 7. Continue to program additional MACRO key sequence or press CLEAR key to return to PROGRAM MODE screen. 148 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 149: Options Programming

    5. Select PRINT DATE option. P RI NT PR INT D AT E SE LEC T : UP ,D OWN CH ANG E : CA SH CA NCE L : CL EA R SAM4S NR-500 Series Manual Program Mode Programming • 149...

  • Page 150: System Options

    Y or N Select Y to allow re-tendering should a second TENDER change calculation be necessary. Re-enter the tendered amount and press the CASH key to show the new change computation. 150 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 151 Select Y if you wish to control negative MGR ONLY transactions (when cash is removed from the drawer). When selected mode position must be in the Manager mode to finalize the transaction. SAM4S NR-500 Series Manual Program Mode Programming • 151...
  • Page 152 RS-232C port. Here you can choose the content of single line validation TENDERED DISABLE CASH Y or N Select Y to block the cash declaration function. DECLARATION 152 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 153 4 DIGIT The machine number is printed on the register receipt. Program a machine number so that any receipt can be identified with the store or register where the transaction took place. SAM4S NR-500 Series Manual Program Mode Programming • 153...

  • Page 154: Print Options

    Select Y if you wish to print the subtotal without tax on the receipt. PRT GROUP TOTAL Y or N Choose Y if you wish to print group total after tender. AFTER TENDER 154 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 155: Report Options

    RESET GRAND TOTAL Y or N Select Y if you wish to reset the grand total to zero AFTER Z REPORT after the financial report is reset. SAM4S NR-500 Series Manual Program Mode Programming • 155...
  • Page 156 X financial report. PRINT GROSS TOTAL Y or N Select N if you wish to delete the printing of the ON Z REPORT gross sales total on the Z financial report. 156 • Program Mode Programming SAM4S NR-500 Series Manual...
  • Page 157 Choose N if you would like to suppress register POLLING REPORTS printing when reports are polled. PRINT TRAIN TOTAL Y or N Select Y if you wish to print train total on Financial IN FINANCIAL Report. REPORT SAM4S NR-500 Series Manual Program Mode Programming • 157...

  • Page 158: Tax Options

    Select Y to print input amount by Euro on the receipt. INPUT AMT PRT EURO AMOUNT Y or N Select Y to print change amount by Euro. CHANGE BASE CURRENCY HOME Choose base currency Home or Euro. EURO 158 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 159: Rounding Options

    Choose whether to print the POSTAMBLE on the MESSAGE IN GUEST guest check. PRINT PREAMBLE Y or N Choose whether to print the PRE-GRAPHIC LOGO IMG IN RCPT on the receipt. SAM4S NR-500 Series Manual Program Mode Programming • 159...

  • Page 160: Kitchen Printer Options

    1 will print before items reported to group 2. PRT GROUP DETAIL Y or N Select Y to print Group detail on the order receipt. ON KP 160 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 161: Barcode Options

    STOP OPERATIONS Y or N If the electronic journal is enabled above, select Y if WHEN E.J. BUFFER IS you wish to stop operations when the journal memory FULL is full. SAM4S NR-500 Series Manual Program Mode Programming • 161...

  • Page 162: Train Mode Options

    The password may be up to 6 digits. PRT TRAIN CLERK Y or N Select N if you do not wish to print a message of train START/END MESSAGE clerk start or end. 162 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 163: Detail Print Options

    NOT PRINT MSG ON Y or N Select Y if you do not wish to print message on detail JOURNAL receipt. SPOOL USE Y or N Select N to disable spool. SAM4S NR-500 Series Manual Program Mode Programming • 163...

  • Page 164: Employee Programming

    If Y, you can use P mode. ALLOW S MODE Y or N If Y, you can use S mode. ALLOW VOID Y or N If Y, you can use VOID mode. MODE 164 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 165: Time

    4. From the YES/No type option screen, Press the key for YES and the key for NO. Press the CASH to confirm the option value. 5. If you terminate Time Schedule program, press CLEAR key. SAM4S NR-500 Series Manual Program Mode Programming • 165...

  • Page 166: Taxes Programming

    Enter the percentage rate for the sales tax. For example if the tax is 6 percent, enter 6000. Press CASH to set the rate. 6. Continue to program additional taxes or press CLEAR to return to the PROGRAM MODE screen. 166 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 167: Programming A Vat (Value Added Tax)

    Enter the percentage rate for the sales tax. For example if the tax is 6 percent, enter 6000. Press CASH to set the rate. 6. Continue to program additional taxes or press CLEAR to return to the PROGRAM MODE screen. SAM4S NR-500 Series Manual Program Mode Programming • 167...

  • Page 168: Programming A Canadian Gst

    ↑ ↑ ↑ ↑ key and the ↓ ↓ ↓ ↓ key, the pressing the CASH key 7. Continue to program additional taxes or press CLEAR to return to the PROGRAM MODE screen. 168 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 169: Messages

    CASH key to confirm. Select the Postamble line you wish to program. 3. Continue to program additional Postamble or press CLEAR to return to the PROGRAM MODE screen. SAM4S NR-500 Series Manual Program Mode Programming • 169...

  • Page 170: Financial Report

    3. After you have completed typing the descriptor, press CASH to accept the new message. 4. Continue to program additional Report message or press CLEAR to return to the PROGRAM MODE screen. 170 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 171: Mix & Match Program

    5. At the AMOUNT field, enter the amount of the discount.. 6. Press the CASH key to view the MIX & MATCH PGM screen or press the CLEAR to exit. SAM4S NR-500 Series Manual Program Mode Programming • 171...

  • Page 172: Program Scans

    CASH key to confirm. Select the PGM SCAN. You can also select menu by page ↑ ↑ ↑ ↑ key and page ↓ ↓ ↓ ↓ key. 172 • Program Mode Programming SAM4S NR-500 Series Manual...

  • Page 173: Sample Reports

    ￡ sales for each tax ITEM DISC. -0.48 SALE DISC. Total and count for -5.22 each % function key SALE SURCH. (i.e. discounts & 3 .23 ￡ coupons) continued . . . SAM4S NR-500 Series Manual Sample Reports • 173...
  • Page 174 Total and count for ￡ P/O 1 each type R/A -140.00 (received on P/O 2 account) and P/O 0 .00 (paid out) key. ￡ P/O 3 0 .00 ￡ continued . . . 174 • Sample Reports SAM4S NR-500 Series Manual...
  • Page 175 CHG7-IN-D 0 .00 ￡ CHG7 DEC AMT 0 .00 ￡ OVER/SHORT 0 .00 ￡ CHG8-IN-D 3 .04 ￡ CHG8 DEC AMT 0 .00 ￡ OVER/SHORT 0 .00 ￡ continued . . . SAM4S NR-500 Series Manual Sample Reports • 175...
  • Page 176 ￡ items serviced AVG ITEM/CUST 7.29 items per customer, / CUST 1 0.81 and average dollar ￡ ￡ ******************************** sales per customer GRAND 3 75.63 ￡ CLERK 01 000209 00000 Grand total 176 • Sample Reports SAM4S NR-500 Series Manual...

  • Page 177: Time

    Percentage of total SALES AMT 9 7.33 sales ￡ SALES RATE 34.61% ******************************* Number of TOTAL CNT Transactions all TOTAL AMT 2 81.18 periods ￡ Net sales in all CLERK 01 000209 00000 periods. SAM4S NR-500 Series Manual Sample Reports • 177...

  • Page 178: Plu

    NAILS CNT 15.55 2 4.72 ￡ SALES RATE 9.20% Total activity for all ******************************* PLUs TOTAL CNT 189.56 TOTAL AMT 2 68.60 ￡ Total sales for all CLERK 01 000209 00000 PLUs. 178 • Sample Reports SAM4S NR-500 Series Manual...

  • Page 179: Clerk

    6 7.03 ￡ ------------------------------- LAURA NET SALE 0 .00 ￡ DRWR TTL 1 8.64 ￡ ------------------------------- PEGGY ------------------------------- MOLLY NET SALE 2 .06 ￡ DRWR TTL -22.01 ------------------------------- CLERK 01 000209 00000 SAM4S NR-500 Series Manual Sample Reports • 179...

  • Page 180: Individual Clerk

    GROUP : 9 STORE MDSE 77.56 SALES AMT 7 4.58 ￡ Number of items ******************************** sold in all groups. TOTAL CNT 189.56 TOTAL AMT 2 68.60 ￡ Net sales for all CLERK 01 000209 00000 groups. 180 • Sample Reports SAM4S NR-500 Series Manual...

  • Page 181: Day

    13:32 REPORT 00001 ------------------------------- ALL PLU STOCK PLU number PLU Descriptor PLU#1 HAMBURGER Current inventory count PLU#2 DBL BURGER PLU#7 ROAST 25.96 PLU#28 UNLEADED 1488.47 PLU#33 NAILS 161.25 CLERK 01 000209 00000 SAM4S NR-500 Series Manual Sample Reports • 181...

  • Page 182: Check File

    REPORT 00001 ------------------------------- IN-DRAWER CASH-IN-D 0 .00 Cash in drawer total ￡ CHECK-IN-D 0 .00 ￡ Foodstamp in drawer FD/S-IN-D 0 .00 Check in drawer ￡ total CLERK 01 000209 00000 total 182 • Sample Reports SAM4S NR-500 Series Manual...

  • Page 183: Balancing Formulas

    Discounts Credit Tax 1 ￡ Credit Tax 2 ￡ Credit Tax 3 ￡ Credit Tax 4 ￡ Merchandise Return ￡ Void mode Total ￡ Mix & Match Total ￡ Gross Sales ￡ SAM4S NR-500 Series Manual Sample Reports • 183...

  • Page 185: Glossary

    When a kitchen printer, or requisition system is used, the merchant may wish to force the entry of a condiment or instruction for specific items. If compulsory condiment status is set for a specific PLU, then a condiment PLU must follow the entry of the item. SAM4S NR-500 Series Manual Glossary • 185...
  • Page 186 Like some of the more expensive POS systems, the SAM4S NR-500 Series have the capability of storing a sales journal in memory. The electronic journal can be reviewed and discarded, saved to an SD card or polled by a PC for archival.
  • Page 187 Link (PLU Link) Use linked PLUs if you wish the registration a PLU to automatically cause the registration of another PLU (for example to automatically add a bottle deposit.) Linked PLUs are set SAM4S NR-500 Series Manual Glossary • 187...
  • Page 188 No sale is an operation to simply open the cash drawer. No sales are counted and reported on the financial report. Not Found PLU For small merchants, the NR-500 Series can build a PLU file “on the fly”. Each time an 188 • Glossary SAM4S NR-500 Series Manual...
  • Page 189 The SAM4S NR-500 Series allows a preamble message of up to six lines, each with up to 32-characters, to be printed at the top of each receipt. A postamble of up to 6- lines of 32-characters can also be printed at the bottom of the receipt.
  • Page 190 Surcharge (Item) An item percent surcharge adds a percentage to the price of an item. This addition nets the PLU total. Surcharge (Sale) A sale percent surcharge adds a percentage to the entire sale. 190 • Glossary SAM4S NR-500 Series Manual...
  • Page 191 A void operation will erase a previous item entry. It must be used inside of a sale only. X & Z Reports X (eXamine) reads reports without resetting and Z (Zero) reads and resets your sales totals. SAM4S NR-500 Series Manual Glossary • 191...
  • Page 192 SAM4S NR-500 Series Manual Glossary • 192...

This manual is also suitable for:

Nr-500 seriesNr-520rb

Table of Contents

Save PDF