Descriptor Code Method - Sam4s NR-500 Series Operating And Programming Manual

Descriptor Code Method

If you customize your keyboard by covering key locations, or by installing double or quad
size keys, you will need to program descriptors using the descriptor code method. See
"SYSTEM" of "Options Programming" on page 150. You must set the "DESC. PGM
METHOD" option to be CODE TYPE.
Program Sequence
Program Example
To program the descriptor "APPLE", type:
[065]
A
For DOUBLE (wide) characters enter 999 after the descriptor code. For example:
A = [999] [065] [CASH]
116 • Program Mode Programming
1. With the cursor pointed at a descriptor field, refer to the Descriptor Code Chart
below and type the code for the first character.
2. For each additional character, type the code. Each character will be displayed as
it is entered.
3. Press CASH when the descriptor is complete.
[080] [080]
P P
[076] [069] [CASH]
L E
SAM4S NR-500 Series Manual