System Options - Sam4s NR-500 Series Operating And Programming Manual

Options - Reference Information

SYSTEM options

Option
BEEPER ACTIVE
CLERK ENTRY
0:PUSH 1:CODE
CLERK IS Y:POP-UP
N:STAY-DOWN
CLERK INTERRUPT
DECIMAL PLACE
DATE FORMAT IS
DESC. PGM
METHOD
DRAWER MUST BE
SHUT TO SALE
ACTIVATE OPEN
DRAWER ALARM
DRAWER OPEN
TIME (0-99)
ALLOW POST
TENDER
150 • Program Mode Programming
↑ ↑ ↑ ↑
6. Press the key for YES and the
Press the CASH to confirm the option value and return option screen.
Entry
Y or N
0 or 1
Y or N
Y or N
0-3
MMDDYY,
DDMMYY,
YYMMDD
OVERLAY,
CODE
Y or N
Y or N
0-99
Y or N
↓ ↓ ↓ ↓
key for NO.
Description
Select N for a silent keyboard.
Select PUSH for a push button clerk, select CODE
for a code entry clerk system (number - clerk or
clerk - number - clerk) sequence.
Select Y for pop-up clerks, select N for stay down
clerks. With pop-up clerks, you must sign on for
each transaction. With stay down clerks, the
same clerk remains signed on until sign off.
If allowed, a new clerk can be signed on in the
middle of a transaction. In this circumstance, the
initial transaction is suspended. When the
interrupt transaction is completed, the suspended
transaction can be continued.
Enter a digit to place the decimal point the selected
number of positions from the right.
Select date printing format.
When OVERLAY TYPE, program descriptors by
pressing the appropriate key on the program
overlay. When CODE TYPE, program
descriptors by typing the code for each descriptor
character.
Select Y to enforce closed drawer for register
operations.
Select Y if you want the error tone to automatically
sound when the drawer stays open longer than the
time set in the following field.
If you enable the open drawer alarm above, you
can set the length of time (1-99 seconds) before the
alarm sounds.
Select Y to allow re-tendering should a second
change calculation be necessary. Re-enter the
tendered amount and press the CASH key to show
the new change computation.
SAM4S NR-500 Series Manual