Memory Allocation Information - Sam4s NR-500 Series Operating And Programming Manual

6. The SERVICE MODE menu displays. The RAM Clear procedure is complete and
7. If you want to allocate memory by default value, Press CASH key only.
8. If you want to finish memory allocation, press CASH key until LCD display "ARE
DEFAULT Memory allocation Specifications
PLU
CLERK
GROUP
PRICE LEVEL
MIX AND MATCH
EJ LINE
CHECK#
SOFT CHECK LINES
CHECK TYPE

Memory Allocation Information

26 • Getting Started
the receipt prints.
LO AD DE FA UL T SET
N= X/T IM E Y =C ASH
Or press X/TIME key to allocate by yourserf. And follow the On-screen prompts.
AL LOC AT IO N
PL U #
(1 80 – 60 00 )
YOU SURE?" message. And if you want to allocate memory area again, press
CLEAR key. Repeat the allocation sequence.
ALLOCATION ITEM
1. From the SERVICE MODE screen, select ALLOCATION menu and Press
CASH if you want to scan memory allocation.
10 00
DEFAULT
1000
10
10
1
20
1000
10
50
0 SOFT(0) / HARD(1)
MAX
6000
99
99
2
100
15000
500
100
SAM4S NR-500 Series Manual