Initial Clear - Sam4s NR-500 Series Operating And Programming Manual

Initial Clear

CAUTION: Do not share this information with unauthorized users. This procedure
will not effect register programming, or clear previously stored totals in RAM
memory.
The initial clear function allows you to exit any register activity and return to a beginning
or cleared state. Any transaction that is in progress will be exited and totals for that
transaction will not be updated.
Here are some reasons you may want to perform an initial clear:
•
•
•
Perform this procedure only as necessary. Contact your SAM4S dealer first if you have
questions about operating or programming your SAM4S NR-500 Series.
To Perform an Initial Clear:
1. Move to the PROGRAM MODE.
2. Turn the power switch located on the right side of the register to the OFF position.
3. Press and hold the key position where the CASH key is located on the default
4. While continuing to hold the CASH key, turn the power switch to the ON position.
5. Press the CASH key.
6. Press the CASH key. To resume operations, you will need to sign on a clerk.
22 • Introduction
The register is in an unknown state, and you wish to exit the current program or
transaction without following normal procedures.
You have performed a function that includes a compulsory activity and you wish to
bypass the compulsion.
An initial clear may be necessary as part of servicing, or troubleshooting.
keyboard layout.
When the "INITIAL CLEAR" message displays release the CASH key.
IN ITI AL C LE AR
EN TER C AS H KE Y
AR E Y OU S UR E?
Y =C ASH N =C LE AR
SAM4S NR-500 Series Manual