Group Programming - Sam4s ER-900 Series Operation & Programming Manual

Group Programming

Group totals are available to accumulate totals of individual PLUs that are assigned to each
group. Each PLU can be assigned to one, two or three different groups.


Programming Group Status - Program 900
Use program 900 to assign a group status,
i.e. a group can be set to
can be used to designate like items for kitchen printer assignment.
Use program 910 to assign a unique descriptor
for each group, so that the group may be easily understood on the
group report.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0 0, then press the SBTL key.
9 0 0
3. Enter the number of the group and then press QTY/TIME key.
QTY/TIME
4. Enter an option digit from the table below, then press the SBTL key.
Address OPTION
Group total is added to the total of all
N1
group on the Group report?
Send to kitchen printer?
No Choice
N2
KP PORT# : R
(print a kitchen requisition)
KP PORT# : 1
KP PORT# : 2
KP PORT# : 3
N3
KP PORT# : 4
Print Inverse on External Printers?
N4
N1 N2 N3
5. To program additional groups, repeat from step 3, or press the CASH
key to Finish
CASH
not add
to the total of all groups, or a group
SBTL
N4 SBTL
VALUE = SUM
Yes = 0
No = 1
Yes = 2
No = 0
0
1
2
4
1
2
Yes = 1
No = 0
 161