Group Programming - Sam4s ER-5200 Operation And Program Manual

Group Programming

Group totals are available to accumulate totals of individual PLUs that are assigned to each group. Each PLU
can be assigned to one, two or three different groups.
Programming Group Status - Program 900
160 • Program Mode Programming
•
Use program 900 to assign a group status, i.e. a group can be set to not add to
the total of all groups, or a group can be used to designate like items for kitchen
printer assignment.
•
Use program 910 to assign a unique descriptor for each group, so that the group
may be easily understood on the group report.
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0 0, press the SBTL key.
9 0 0
3. Enter the number of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SBTL key.
Address OPTION
Group total is added to the total of all
N1
group on the Group report?
Send to kitchen printer?
No Choice
N2
KP PORT# : R(print a kitchen requisition)
KP PORT# : 1
KP PORT# : 2
Print RED on KP?
N3
N1 N2 N3
5. To program additional groups, repeat from step 3, or press the CASH key to
finalise the program.
CASH
SBTL
SBTL
VALUE = SUM
Yes = 0
No = 1
Yes = 2
No = 0
0
1
2
4
Yes = 1
No = 0
ER-5200/40/15