Plu Name Programming - Sam4s ER-180T Series Operation And Programming Manual

PLU Name
A 12 letter name can be programmed to each PLU key using alpha keys or
codes as shown below. This name is printed on receipts and the PLU report.
Name – By Alpha Keys
Insert the key stamped C and turn to the PGM position
•
Enter 20 then the 3 digit PLU code and press the SUBTOTAL key
•
I.e. 20001 SUBTOTAL for PLU code 1
The display shows
•
Press the number key 1,2,3, or 4 times to select the required letter.
•
The key press count
Wait until the letter count has increased
•
Up to 12 letters can be printed. Bold, Caps, and Back can also be selected
Press the SUBTOTAL key and repeat for further items if required
•
To finish press the CASH/TEND key and return to the REG position
•
2 0
Press up to 12 letters using the alpha keyboard
Name – By Alpha Code Entry
Insert the key stamped C and turn to the PGM position
•
Enter 300 and press the SUBTOTAL key
•
On the number keys type the PLU number and press the PLU key
•
I.e. 1 PLU code 1
Enter the 3 digit letter code
•
Press the X/TIME key
•
For further PLU Codes, repeat by entering the PLU number, pressing the
•
PLU key, then entering the set of 3 digit letter codes and pressing X/TIME
To finish press the CASH/TEND key and return to the REG position
•
3 0
3 digit
3 digit
code code
which is PLU No– Letter Count – Key Press Count
001-00-0
will increase per letter
E.g. 001-00-1
x x
------------PLU No--------------
7 8 9
Space ABC DEF
4 5 6
GHI JKL MNO
1 2 3
PQRS TUV WXYZ
0 00 .
Bold Caps Back
(see appendix a),
0 SUBTOTAL
3 digit
Etc up to 12 letters
code
and select the next letter.
E.g. 001-01-0
x
SUBTOTAL
SUBTOTAL
CASH / TEND
repeat for up to 12 letters
Enter Code
1 - 500
X/TIME
I.e.
(=)
PLU
CASH / TEND
(=)
Program Mode • • • • 49