Printer Configurations - Lexmark MS312 User Manual

Learning about the printer
•
Keep the printer:
– Clean, dry, and free of dust.
–
Away from stray staples and paper clips.
–
Away from the direct airflow of air conditioners, heaters, or ventilators.
–
Free from direct sunlight and humidity extremes.
• Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 16 to 32°C (60 to 90°F)
Storage temperature ‑20 to 40°C (‑4 to 104°F)
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 Right side 110 mm (4.33 in.)
2 Front 305 mm (12 in.)
3 Left side 65 mm (2.56 in.)
4 Rear 100 mm (3.94 in.)
5 Top 305 mm (12 in.)

Printer configurations

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
You can configure your printer by adding one optional 250‑ or 550‑sheet tray. For instructions on installing the optional
tray, see "Installing optional trays" on page 16.
10