Lexmark MS312 User Manual page 162

Troubleshooting
Printer restart. Check last job.
Press on the printer control panel to clear the message and continue printing.
For more information, visit
Rear USB port disabled [56]
Try one or more of the following:
• From the printer control panel, press
Note: The printer discards any data received through the USB port.
• From the printer control panel, set USB Buffer to Auto.
Too many trays. Remove some. [58]
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the extra trays.
4
Connect the power cord to the electrical outlet.
5
Turn the printer back on.
MS315 and MS415 printer messages
Change [paper source] to [custom string] load [orientation]
Try one or more of the following:
•
Load the correct size and type of paper in the tray, and then press
Note: Make sure the paper size and type settings are specified in the Paper menu on the control panel.
•
Select Use current [paper source] on the control panel to clear the message and continue printing using the current
size and type of paper in the tray.
•
Cancel the print job.
Change [paper source] to [custom type name] load [orientation]
Try one or more of the following:
•
Load the correct size and type of paper in the tray, and then press
Note: Make sure the paper size and type settings are specified in the Paper menu on the control panel.
•
Select Use current [paper source] on the control panel to clear the message and continue printing using the current
size and type of paper in the tray.
•
Cancel the print job.
http://support.lexmark.com
to clear the message and continue printing.
or contact customer support.
on the control panel.
on the control panel.
162