Finishing Menu - Lexmark MS312 User Manual

Understanding the printer menus
Use
Resource Save
On
Off

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
print job that requires more than the available memory.
Notes:
•
Off is the factory default setting. Off sets the printer to retain
downloads only until memory is needed. Downloads are
deleted in order to process print jobs.
• On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full [38] appears on the
printer display, but downloads are not deleted.
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
• "1 sided" is the factory default setting.
•
You can set two‑sided printing from the software program.
For Windows users:
1
Click File > Print.
2
Click Properties, Preferences, Options, or Setup.
For Macintosh users:
1
Choose File > Print.
2
Adjust the settings from the print dialog and pop‑up menus.
Define the way two‑sided pages are bound and printed.
Notes:
•
Long Edge is the factory default setting. Long Edge binds pages along their long
edge (left edge for portrait and top edge for landscape).
• Short Edge binds pages along their short edge (top edge for portrait and left
edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether to insert blank pages in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
115