Lexmark MS312 User Manual page 171

Troubleshooting
Load [paper source] with [paper size] [orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size of paper.
•
From the printer control panel, press
Note: If the printer finds a tray that has the correct paper size, then it feeds from that tray. If the printer cannot
find a tray that has the correct size of paper, then it prints from the default paper source.
• Cancel the current job.
Load [paper source] with [paper type] [paper size] [orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, press
•
Decrease the resolution setting.
•
Install additional printer memory.
Print quota exceeded. Print job canceled.
Contact your system support person.
Print quota exceeded. Print job incomplete.
Contact your system support person.
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
•
Check if the toner cartridge is missing. If missing, install the toner cartridge.
For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide.
•
If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner
cartridge.
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message.
171