Using The Terminals; E5Cc Terminal Block Wiring Example - Omron E5C User Manual

2 Preparations
2-2

Using the Terminals

2-2-1

E5CC Terminal Block Wiring Example

Terminal Arrangement
The terminals block of the E5CC is divided into five types of terminals: control outputs 1 and 2, sensor input,
auxiliary outputs, input power supply, and options.
Control outputs 1 and 2
Sensor input
Precautions for Correct Use
When you purchase the Digital Controller, it will be set for a K thermocouple (input type = 5) by
default. If a different sensor is used, an input error (s.err) will occur. Check the setting of the
Input Type parameter.
Control Outputs 1 and 2
Model Numbers
The specifications for control outputs 1 and 2 are given in the following location in the model number.
E5CC-@@ @ @ @ M-@@@
Code
RX 1 relay output
QX 1 voltage output (for driving SSR)
CX 1 linear current output
QQ 2 voltage outputs (for driving SSRs)
CQ 1 linear current output and 1 voltage
output (for driving SSRs)
2 - 12
G
A M
N H
B
C O I
D P J
E Q
K
F R L
Options
Control outputs 1 and 2
Output type
Auxiliary outputs
Input power supply
Specification
250 VAC, 3 A (resistive load)
12 VDC, 21 mA
4 to 20 mA DC or 0 to 20 mA DC with load of 500 Ω
max.
12 VDC, 21 mA
4 to 20 mA DC or 0 to 20 mA DC with load of 500 Ω
max. for current output and 12 VDC, 21 mA for voltage
output
E5@C Digital Temperature Controllers User's Manual (H174)